what do think? crank run out
#1
what do think? crank run out
so im doing the following build
 \\;\\\\\\;
R and R stage 4 heads10-1 comp .030" head gasketJE flat top pistons 103"D and D fatcatwoods tw6-6 camsthundermax efiAN big sucker
 \\;\\\\\\;
the bike has 5800 miles on it with a stage one.....
 \\;\\\\\\;
Im doing the build now and i have a .0045 crank run out , thats with the cam plate of at the very end of the crank. the oil pump looks really good. \\; should i just roll the dice and see what happens??
 \\;\\\\\\;
R and R stage 4 heads10-1 comp .030" head gasketJE flat top pistons 103"D and D fatcatwoods tw6-6 camsthundermax efiAN big sucker
 \\;\\\\\\;
the bike has 5800 miles on it with a stage one.....
 \\;\\\\\\;
Im doing the build now and i have a .0045 crank run out , thats with the cam plate of at the very end of the crank. the oil pump looks really good. \\; should i just roll the dice and see what happens??
#2
RE: what do think? crank run out
We have seen 'em worse and witnessed nothing adverse when tore down.
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
Thread
Thread Starter
Forum
Replies
Last Post
jakdelux07
Primary/Transmission/Driveline/Clutch
1
06-10-2008 09:14 PM