SE255 Cams in 96 Twin Cam
#11
Just to finalize what happened to my Fltr. My indie dealer denied that there was anything wrong. He said that Harley Cams are POS. I took it back and demanded a closer look at what was going on. When I got it back he said that he didn't know what was wrong but they pulled it apart and put it back together and now it runs right. Go figure...He wouldn't own up to anything wrong but now I have 79 hp and 93 ft lbs of torque. He's no longer my mechanic. I suspect the cams were one tooth off.
Thanks for everyone's help....It certainly gave me some ammunition when took the bike back.
Thanks for everyone's help....It certainly gave me some ammunition when took the bike back.
Last edited by jfroehler; 09-15-2010 at 10:22 PM.
The following users liked this post:
HillbillyRick (05-11-2023)
#12
#13
Just to finalize what happened to my Fltr. My indie dealer denied that there was anything wrong. He said that Harley Cams are POS. I took it back and demanded a closer look at what was going on. When I got it back he said that he didn't know what was wrong but they pulled it apart and put it back together and now it runs right. Go figure...He wouldn't own up to anything wrong but now I have 79 hp and 93 ft lbs of torque. He's no longer my mechanic. I suspect the cams were one tooth off.
Thanks for everyone's help....It certainly gave me some ammunition when took the bike back.
Thanks for everyone's help....It certainly gave me some ammunition when took the bike back.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#15
Thread
Thread Starter
Forum
Replies
Last Post
The LOWRIDER*64*
Dyna Glide Models
7
09-12-2013 08:09 AM