Replacement pads for PM Brakes
#1
#4
https://www.denniskirk.com/ebc/kevla...prd/194834.sku
#5
Thank you! I did try searching, but PM's website is so good they don't feel the need to list the part numbers for the different calipers.
I'm not happy with their pads so I was looking for another option, so hopefully this will work, thanks again.
David
I'm not happy with their pads so I was looking for another option, so hopefully this will work, thanks again.
David
I'd check with Performance Machine. That's where I bought mine from or this guy. I suggest you use google. Good luck
https://www.denniskirk.com/ebc/kevla...prd/194834.sku
https://www.denniskirk.com/ebc/kevla...prd/194834.sku
#6
I have a 6 piston PM caliper on the front of Reaper, and I use Lyndall 7202 Z-Plus pads. They have 3 sets available for PM 4 piston calipers. Once you determine the part number, give them a call or an email, and they will tell you which ones are the correct fit.
I have been using Lyndall Z-Plus pads for over 10 years (originally with both stock calipers, and now with the stock rear, and PM front), and I highly recommend them.
https://shop.lyndallbrakes.com/colle.../Brakes?page=2
Cheers!
I have been using Lyndall Z-Plus pads for over 10 years (originally with both stock calipers, and now with the stock rear, and PM front), and I highly recommend them.
https://shop.lyndallbrakes.com/colle.../Brakes?page=2
Cheers!
The following users liked this post:
TriSum (03-29-2017)
Thread
Thread Starter
Forum
Replies
Last Post
Slick
Frame/Suspension/Front End/Brakes
7
05-28-2008 09:55 AM