Steering head adj.
#1
Steering head adj.
05 Wideglide doing the fall away test I get 1" of fall on left side and 4.5" on the right ,I loosen stem nut and get 0 on left and 3 .5 on right. Went by the service man. clutch cable removed and all electrical harness' =no binding. Seems no matter what I do it never evens out. Lost at what else to look for
#2
#3
#4
#5
After tearing it apart today I came to the same conclusion what PITA this is getting to be . Guess Ill take it in to work and torch the bottom stem bearing off do I need to press that 1 back on also ? Manual says to cut cage and take the rollers out and heat race it will fall off, so that means the new bearing will not just slide on right.
Thread
Thread Starter
Forum
Replies
Last Post