75 sportster handling
#11
Join Date: Oct 2015
Location: Pine Flat Dam/South Bay Area, CA
Posts: 11,546
Received 20,163 Likes
on
6,810 Posts
#13
Start with the basics. Tires, proper air pressure? How old are they? If they are over 5 years old, replace them. Check the wheel bearings too. There's a real good chance the fork oil hasn't been changed in a long time, do that and check the steering head bearings at the same time. The shocks probably need replacing too. Check the swingarm bushings while you're at it.
Check (or have checked) each and every one of these, not only for handling, but for your safety. You get that old ironhead back to specs won't be a darn thing wrong with the handling. Pay no attention to those that say buy newer.
I'd walk past a whole lot full of new and nearly new bikes to check out yours!
#14
Thanks all for the good info. Tire pressure is low and bars do need adjusted up. I will correct that. Foot controls are stock no mods there. I think I will just have to get used to it too I realize it's not gonna be a smooth ride, just felt not right when I took it out the other day. I have a 74 yamaha I'm used to riding more of an upright position. Trade up for a new model? Maybe someday. I'm 34 both my bikes roll off the line before I was born I think that's kind of neat
Dude, your math must be screwed up. There's NO WAY that the mid '70's were more than 34 years ago
Enjoy your bike, and like everyone else here said, check your swingarm and neck bearings, get new fork oil and possibly do a fork rebuild, and get some good rubber on that beast.
#15
#17
An HD sales lady that I know got a 77 last year and is going through it this winter. She had no problem with handling and she is an accomplished rider currently with two Sportsters and a Slim. Does most of her own mechanical work.
That is a great bike to ram around in.
I would suggest a fork brace which always helps.
That is a great bike to ram around in.
I would suggest a fork brace which always helps.
#18
Join Date: Oct 2015
Location: Pine Flat Dam/South Bay Area, CA
Posts: 11,546
Received 20,163 Likes
on
6,810 Posts
#19
I bought a new '75 Sportster (Gold) XLH in late '74.
Beautiful little bike but I very quickly realized (400 miles) that it was far too small for me.
I can't speak to the handling as I rode it so little, but I'd agree with others here that new, properly inflated tires and new swing arm bushings could make a huge improvement in handling.
Beautiful little bike but I very quickly realized (400 miles) that it was far too small for me.
I can't speak to the handling as I rode it so little, but I'd agree with others here that new, properly inflated tires and new swing arm bushings could make a huge improvement in handling.
#20
Thanks all for the good info. Tire pressure is low and bars do need adjusted up. I will correct that. Foot controls are stock no mods there. I think I will just have to get used to it too I realize it's not gonna be a smooth ride, just felt not right when I took it out the other day. I have a 74 yamaha I'm used to riding more of an upright position. Trade up for a new model? Maybe someday. I'm 34 both my bikes roll off the line before I was born I think that's kind of neat
Thread
Thread Starter
Forum
Replies
Last Post