Shoei helmet with Pin Lock insert
#1
Shoei helmet with Pin Lock insert
I have a Shoei helmet with the pin lock insert. The narrow silicone sill around the insert acts like a magnifying glass when the sun hits it just right. Even through the sun visor it will hurt your eye. Was wondering if anyone else has had this problem and what did you do to fix it? Is there any kind of dye that you could put on silicone that wouldn't ruin it? It works to good on fog to give up on.
#4
The following users liked this post:
RonaldL (02-16-2018)
#5
I have the Shoei Air Gt, with the pinlock insert and internal visor. There is no way to solve it other than get used to it. The Pinlock insert actually is not approved for low light riding conditions which is when it really bothered me the most at first. Subsequently, its too much of a pain in the *** to constantly remove and re-install the pinlock. I deal with the glare which is manageable at night, most of the time at night I ride with the visor up and use clear safety glasses as the internal visor is too dark for me at night. The pinlock installed however is incredible, almost magical against fog.
When the pinlock is new, as you know its flat. Once installed it retains the bent shape and is really tough to store away without scratching.
When the pinlock is new, as you know its flat. Once installed it retains the bent shape and is really tough to store away without scratching.
Last edited by Cbyway; 02-16-2018 at 02:54 PM.
The following users liked this post:
RonaldL (02-16-2018)
#6
I have the shoei Neo Tec modular [ flip up ] with the drop down visor. Bothers me even through the sun visor. It's a very bright concentrated glare like a magnifying glass. I did try to ignore the glare and tip my head and all that, but ended up having to pull in to a rest area and pull the pin lock out. Had one really red eye. Think I'll look in to that window tint.
The following users liked this post:
RonaldL (02-17-2018)
#9
#10