SE STAGE III OR? Need advice!
#1
SE STAGE III OR? Need advice!
Ok let me explain my situation here I have a 2010 DYNA FXDC and lets just say I am now bored with my TC96 and I want more power. I already have the SE heavy breather, the Power commander and the Thunderheader with a DYNO of 75HP and 91Tq which is ok but I am a Traditional freedom loving red blooded AMERICAN who wants more power just because..... I WANT MORE POWER! I had been looking at the SE stage III and IV because I dont want to void my 2 year warranty if it is installed by a HD Stealer. However I went to a local shop who is very well known for his performance kits and he said he can use my existing heads and cylinders to be ported and bored out and it would not void my warranty. This guy is VERY good at what he does I know this as a fact and his shop is spotless and state of the art. The price is approx. $3500 parts and labor compared to the stealer price of over $4000 parts and labor. I am looking for some opinions here and would like to see what some of you have to say.
THANKS!
p.s.
This kit will put me in the 112hp 122tq area
P.s.s.
Dont bother with a response if your going to say "WHY DO YOU NEED MORE POWER?" Because Thats precisely what an Obama supporter would say and Obama supporters are not welcome here!
THANKS!
p.s.
This kit will put me in the 112hp 122tq area
P.s.s.
Dont bother with a response if your going to say "WHY DO YOU NEED MORE POWER?" Because Thats precisely what an Obama supporter would say and Obama supporters are not welcome here!
#3
I am in a similar situation.
Called the H-D in New Roc, was quoted $4500 for a Stage II not including dyno.
Just spoke to Scott at Hillside Cycle, who quoted me a decent chunk less for a 107" build from him.
I will be going with Hillside Cycle.
Called the H-D in New Roc, was quoted $4500 for a Stage II not including dyno.
Just spoke to Scott at Hillside Cycle, who quoted me a decent chunk less for a 107" build from him.
I will be going with Hillside Cycle.
#4
Something not right here ,I got stage II 103 kit and cams installed for 1350.00 I already had the air breather and sert and pipes.
#5
i asked the sum'bitch to repeat himself. i repeated i was just looking for the stage ii 103... and he said 4500 for the third time. i said thanks but no thanks.
#6
did he offer a reach around with that screwing? man for $4500 you can buy a awhole new engien off ebay
#7
I had been looking at the SE stage III and IV because I dont want to void my 2 year warranty if it is installed by a HD Stealer.
Dont bother with a response if your going to say "WHY DO YOU NEED MORE POWER?" Because Thats precisely what an Obama supporter would say and Obama supporters are not welcome here!
Dont bother with a response if your going to say "WHY DO YOU NEED MORE POWER?" Because Thats precisely what an Obama supporter would say and Obama supporters are not welcome here!
Last edited by JerryL....; 07-20-2010 at 08:31 PM.
Trending Topics
#10
My dealer told me it voids the warranty, even if they do it. I sold the 09 I was wanting to big bore, so I just decided to do it to the 04, warranty is gone anyway. The price for the 04, to go to SE stage II was 1800 at my dealer. BTW, I voted for Obama, I'll still post here, like it or not.