Thanks, Jim... I am trying to decide between aluminum/steel; SA vs Tandem and 6x12 vs 7x12/14... Spent my honeymoon in Victoria.. way back in 78.... lol. If you can email me, I'd appreciate it... off to the woods in northern Wisconsin to bow hunt.... thanks again!

 

Here is one of the mounting brackets I made for the stabilizer jacks. They were too long to swing down if mounted to the bottom of the frame, so I tucked them up two inches along side the frame in the back corner. They work pretty darn good. Those bolts sticking down through the floor that I braced off of are from the D-ring above.

 

subscribed.