Custom Medallions
#31
RE: Custom Medallions
I kind of thought it was a bit cheesy myself...but I have often thought that what's good for one might not be good for another...so live and let live, if you will.
I will look around for you and see what I can find. I'm guessing that's about the size that you want, you never know what you'll find in these border towns.
Mac
I will look around for you and see what I can find. I'm guessing that's about the size that you want, you never know what you'll find in these border towns.
Mac
#33
RE: Custom Medallions
No bigger than 3.5" at its largest point I suppose. And yes a flat back. Of course, I'll be expecting instruction on how to mount it.
#36
RE: Custom Medallions
hehehe, this is neat as hell.
Stones, like most emblems with a flat surface they use 3-M 2-sided tape. It's easy to use too.
Appy it, trim away the excess with a razor blade. Whala! it's ready to be mounted.
I had the antique-gold upswept Eagle with bar that I removed from my air cleaner cover. It didn't go with the look I wanted.
I soaked it with a little "Goof-off" (that stuff is the best adhesive remover I've ever used) and with a little help, it came right off.
What sticky **** that was left, easily came off with another application of the remover.
Stones, like most emblems with a flat surface they use 3-M 2-sided tape. It's easy to use too.
Appy it, trim away the excess with a razor blade. Whala! it's ready to be mounted.
I had the antique-gold upswept Eagle with bar that I removed from my air cleaner cover. It didn't go with the look I wanted.
I soaked it with a little "Goof-off" (that stuff is the best adhesive remover I've ever used) and with a little help, it came right off.
What sticky **** that was left, easily came off with another application of the remover.
#40
RE: Custom Medallions
12Stones, sorry I forgot to tell you, the guy that CNC's for me got a job in mexico and will be away for another week. I will not let you down, but free parts always take me a while to get.