Urgent help - cam bearing needle is missing
#21
I looked at the stock bearing and see a small crack where the missing needle is, my gut tells me that's where the crack came from.
#22
Split the cases... 124...
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#23
#24
Really bad news,wish I could be there to help! You really have no option but to presume the roller has fallen out and find it.Dont believe it could be in the pump or cam plate you must have removed those and the cam to got to pulling the bearing. You need to follow Steves advice without panicking,one step at a time! Get yourself one of those very powerful 1/4" retriever magnets on an aerial extension rod or flex spring which can get into all the nooks and crannies.Also check it is not stuck to the drain plug magnet.Real sorry for your trouble!
#25
Really bad news,wish I could be there to help! You really have no option but to presume the roller has fallen out and find it.Dont believe it could be in the pump or cam plate you must have removed those and the cam to got to pulling the bearing. You need to follow Steves advice without panicking,one step at a time! Get yourself one of those very powerful 1/4" retriever magnets on an aerial extension rod or flex spring which can get into all the nooks and crannies.Also check it is not stuck to the drain plug magnet.Real sorry for your trouble!
#26
The following 11 users liked this post by purpledeuce:
badcooky (03-11-2018),
Damien 604 - 05fxdc (11-19-2021),
dwagar (03-12-2018),
empowered01 (03-11-2018),
jockotwin (03-11-2018),
and 6 others liked this post.
#29
The following 2 users liked this post by purpledeuce:
mjwebb (03-11-2018),
TomcatCV62 (03-12-2018)
#30
Right now they feel amazing lol! But that’s because my nightmare of spending gobs of money has gone away. I told another member that’s been instrumental in helping me through this that I’m gonna get the bike properly dyno’d and take my wife out for a steak dinner for putting up with me last night