Kuryakyn Widow Pegs with Tour-Tech Cruise Mounts
#1
Kuryakyn Widow Pegs with Tour-Tech Cruise Mounts
$150 shipped;
Kuryakyn Widow Pegs with Male Mount Full custom footpeg design Ominous black widow design nestled in the rubber pads
Price: $99.99
Tour-Tech™ Cruise Mounts
for 1-1/4" Engine Guards
For Tall Riders (Short Arm):
4520 Mounts Only, No Pegs $109.99
These Cruise Mounts with positive locking Quick Clamps offer an incredible range of adjustability. The entire assembly may be moved up or down on the engine guard. The arm and footpeg may be further adjusted along a vertical or horizontal arc. A unique clevis permits angle adjustment of the footpeg.
The heavy duty Quick Clamp and sturdy offset arm ensures that the footpegs will clear fairing lowers and will stay where you put them! Tour-Tech Cruise Mounts are available by themselves, permitting the use of any H-D style male mount peg, or with a variety of Küryakyn footrests. Recommended for H-D Touring Models, FLSTC, or any Model using 1-1/4" engine guards.
http://www.kuryakyn.com/index.cfm/go...ID/17/IMID/462
pics here:
http://s19.photobucket.com/albums/b170/04vrscb/parts/
Kuryakyn Widow Pegs with Male Mount Full custom footpeg design Ominous black widow design nestled in the rubber pads
Price: $99.99
Tour-Tech™ Cruise Mounts
for 1-1/4" Engine Guards
For Tall Riders (Short Arm):
4520 Mounts Only, No Pegs $109.99
These Cruise Mounts with positive locking Quick Clamps offer an incredible range of adjustability. The entire assembly may be moved up or down on the engine guard. The arm and footpeg may be further adjusted along a vertical or horizontal arc. A unique clevis permits angle adjustment of the footpeg.
The heavy duty Quick Clamp and sturdy offset arm ensures that the footpegs will clear fairing lowers and will stay where you put them! Tour-Tech Cruise Mounts are available by themselves, permitting the use of any H-D style male mount peg, or with a variety of Küryakyn footrests. Recommended for H-D Touring Models, FLSTC, or any Model using 1-1/4" engine guards.
http://www.kuryakyn.com/index.cfm/go...ID/17/IMID/462
pics here:
http://s19.photobucket.com/albums/b170/04vrscb/parts/
#3
a buddy owns his own business, and don't have time to sell all his stuff,
so i sell it for him (it's easier to tell the truth about where stuff comes from)
these have been laying on his shelf for a while, were dusty.
i can't tell if they were ever used. i looked them over for several minutes to find an indication, and all i found was one allen bolt head on the clamp has a very light touch of rust in it, just from the tool probably, which would indicate it was washed & water sat in it. i usually swab that out with a q-tip & some oil on my bike.
so i would guess they were put on for a little while, then took off.
but they look BRAND NEW
so i sell it for him (it's easier to tell the truth about where stuff comes from)
these have been laying on his shelf for a while, were dusty.
i can't tell if they were ever used. i looked them over for several minutes to find an indication, and all i found was one allen bolt head on the clamp has a very light touch of rust in it, just from the tool probably, which would indicate it was washed & water sat in it. i usually swab that out with a q-tip & some oil on my bike.
so i would guess they were put on for a little while, then took off.
but they look BRAND NEW
#4
Thread
Thread Starter
Forum
Replies
Last Post
FenderGuy53
Touring Models
0
06-27-2011 12:22 PM