ThunderMax Model No. 309-350
#1
ThunderMax Model No. 309-350
- SOLD -This is used. Taken off my 2007 Ultra Classic in July, 2012. Was installed on bike in 2009.
Only thing missing is the CD. Everything else there.
$550.00 / OBO - shipped to lower 48.
PayPal only.
PM with any questions.
Product Features
· ThunderMax ECM with Auto-Tune module mounts conveniently
· in place of the factory ECM and plugs in to the existing harness
· With the Auto-Tune, AFR tuning for component and exhaust changes
· are self-adjusting simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions
· Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and
Product Description
Thundermax part number: 309-350 fits the following motorcycles:
2002-2007 Harley Davidson Touring Models
2001-2010 Harley Davidson Softtail Models
Not for 2011 FXST
ThunderMax EFI Module w/AutoTune for '01-'10 Softail and '02-'07 Touring Models equipped with cable-type Delphi EFI (not 2008-up Touring Models)
ThunderMax ECM with Auto-Tune module mounts conveniently
in place of the factory ECM and plugs in to the existing harness
With the Auto-Tune, AFR tuning for component and exhaust changes
are self-adjusting simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions
Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and
communication cable, Quick-Start Easy Install and Comprehensive Users Manual, technical support and free software and updates
No extensive dyno tuning required for most models
Alpha-N design unaffected by long duration camshafts
Simple adjustable rev limit, idle, speedo calibration and decel pop control settings
Easily adjust fuel, ignition timing and cold start maps
Supports nitrous and supercharger applications
Versatile plug and ride or live-tune a custom application
Logs engine starts, engine temperatures and total hours of operation time in 100 rpm increments
Read diagnostic codes through software or traditional methods
Record live data during riding or tuning sessions; choose replay speed for data analysis
Maps, software, firmware updates and tech support available on line at no charge
On-line tech support and map analysis
Installation and how-to videos available online (YouTube-ThunderMax AV)
New AutoMap software feature creates new base map based on AutoTune automatically generated AFR corrections
Quickly find the best map for your application using SmartLink Map Filters
Made in the U.S.A.
Only thing missing is the CD. Everything else there.
$550.00 / OBO - shipped to lower 48.
PayPal only.
PM with any questions.
Product Features
· ThunderMax ECM with Auto-Tune module mounts conveniently
· in place of the factory ECM and plugs in to the existing harness
· With the Auto-Tune, AFR tuning for component and exhaust changes
· are self-adjusting simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions
· Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and
Product Description
Thundermax part number: 309-350 fits the following motorcycles:
2002-2007 Harley Davidson Touring Models
2001-2010 Harley Davidson Softtail Models
Not for 2011 FXST
ThunderMax EFI Module w/AutoTune for '01-'10 Softail and '02-'07 Touring Models equipped with cable-type Delphi EFI (not 2008-up Touring Models)
ThunderMax ECM with Auto-Tune module mounts conveniently
in place of the factory ECM and plugs in to the existing harness
With the Auto-Tune, AFR tuning for component and exhaust changes
are self-adjusting simply install, download a map and ride while Auto-Tune maintains target AFR in all conditions
Includes ThunderMax ECM and Auto-Tune Module, plug-in harness and two wide band sensors, SmartLink Software and
communication cable, Quick-Start Easy Install and Comprehensive Users Manual, technical support and free software and updates
No extensive dyno tuning required for most models
Alpha-N design unaffected by long duration camshafts
Simple adjustable rev limit, idle, speedo calibration and decel pop control settings
Easily adjust fuel, ignition timing and cold start maps
Supports nitrous and supercharger applications
Versatile plug and ride or live-tune a custom application
Logs engine starts, engine temperatures and total hours of operation time in 100 rpm increments
Read diagnostic codes through software or traditional methods
Record live data during riding or tuning sessions; choose replay speed for data analysis
Maps, software, firmware updates and tech support available on line at no charge
On-line tech support and map analysis
Installation and how-to videos available online (YouTube-ThunderMax AV)
New AutoMap software feature creates new base map based on AutoTune automatically generated AFR corrections
Quickly find the best map for your application using SmartLink Map Filters
Made in the U.S.A.
Last edited by DocOllie; 03-31-2013 at 09:39 AM. Reason: Sold
Thread
Thread Starter
Forum
Replies
Last Post