For sale is a set of custom Wicked Image Nemesis chrome wheels with disks, pulley, hubs, bearings and front tire. Front wheel is 18" x 3.5" with Dunlop Elite III radial 130/70-18 tire. Tire is basically brand new - around 800 miles. Rear wheel is 18"x 8.5" wheel with matching pulley. Brake disks are Perfomance Machine Savage full floating on front and 1-piece on back. Rotors are basically new and are not exact same design as wheels, but similar enough. Wheels are in good condition, but not perfect. Chrome is nice, but has few scratches. Hold air great - In the 6 years I have had these, I have only had to adjust air pressure a few times. I had these on my bike - 2001 HD Fatboy so axle size is based on that bike - I believe 3/4” front and back. These were on my bike until just recently when my bike got knocked over while parked in front of my house. I decided to sell the wheels because Some of the tins needed repainting and I am changing up the entire look of bike. The pulley is in the roughest condition of any of the parts. I pulled the rear wheel a couple years ago to rebuild brake caliper and had a friend hold the wheel while I was adjusted the jack. She let go of wheel thinking it would stand up like a car tire, but it fell to the ground, scratching and chipping some of the chrome. I rode it like this until just a couple months ago. In ess you have a show bike, you could run it as is or rechrome it for not much $. I would have eventually rechromed pulley, but it was never that big a deal unless really focusing on it and I still got compliments on bike all the time.

Approximate costs new - $1300 front wheel, $1500 back wheel, $350 rear rotor, $450 front rotor, $450 pulley, and $190 tire. That does not include wheel bearings, bolts, etc.

Selling everything for $600 + $60 shipping. This is a great price - tire and front rotor alone cost more than $600 shortly before bike got knocked over. Rear tire size limits potential buyers due to needing wider swingarm. Would definitely prefer to sell locally around Austin, San Antonio, Houston area and avoid shipping. I will ship if necessary, and am guessing shipping would cost approx $60 thru my UPS work account.

I live about an hour from Austin and San Antonio. I saw a guy selling a new wide swing arm/rear tire kit on Craigslist for around $1300. That is a low price for one of those kits. Add these wheels for $600 and someone could get 240 softail for less than the cost of new forged wheels alone.