updated rocker with 23'' front wheel pics
Smooth billet wide glide trees from hhi 3 degree stock legs with 2" drop springs
Advanced
Joined: May 2011
Posts: 90
Likes: 0
From: Oceanside, CA
Just ordered a kit from HHI for my Rocker today. I think its the same kit as yours: 49WGCR3-RKR (triple trees) and WGCK-C802 (axle kit). They said about 3wks. They also said I wouldn't need anything else to set this up (doing it myself in my garage..watch out lol). Was this all you needed for your set up..aside from the 2in progressive drop kit and carlinni's? Any tips on problems or issues you and your shop ran into?
Just ordered a kit from HHI for my Rocker today. I think its the same kit as yours: 49WGCR3-RKR (triple trees) and WGCK-C802 (axle kit). They said about 3wks. They also said I wouldn't need anything else to set this up (doing it myself in my garage..watch out lol). Was this all you needed for your set up..aside from the 2in progressive drop kit and carlinni's? Any tips on problems or issues you and your shop ran into?
yah thats the trees i have. i bought the axle kit too but was a waste of money for me cause since i went with custom wheels i didnt need the rotor spacer or fender spacers i only used the axle but they didnt send me the sleeve that goes in the fork tube. your stock axle has a bolt that holds it together, there gonna a send u a stock 25mm wide glide axle with male threads they didnt send me the nut and washer either but jeff took care of it for me. if your gonna use the stock wheel i can send u the whole kit for $20 u will need a axle (41547-07A) $64.99 axle nut (7813A) $1.49 washer (6655) $.99 and your gonna need that axle sleeve for the fork leg which u can get from hhi or have one machined the dimension for that is .984 od .750 id and 1.375 in length. also the bottom tree is drilled and tapped for a internal stop i used the pro-one internal stop theres 2 slots on the stop just make sure u bolt it on the trees were the shorter slot is towards the rear of the bottom tree so the trees wont hit your gas tank when u turn your bars. its very simple to install if u call and cancel your axle kit youll save some money the kit i have is brand new and u can get the axle and etc from ronnies mailorder thats where i got the price s from. let me know if i can help
So do you suggest just getting the axle kit elsewhere if going with aftermarket wheels? Just wondering because I will be ordering the HHI trees eventually.
Yah definetly the axle is from a 08-up bagger and any flush mount axle for a 08-up will work too but i dont trust flushmount axles due to there allen bolt design. I bought drag specialties axle covers and there pretty sweet and clean
