Post pix of your ape hangers
#31
#32
I had stock 10" Buckhorns on 4" risers, Went with 10" mini apes on 1.5" risers so the wires and cables would reach, but missed the height.
I put the 4" risers back on but it looked "Off".
Bought a set of 12" El Diablo's for Demon Cycle, Took them out of the box and held them in place.
I knew I was going to have to extend everything, so I went with the 14".
10" before
14" now
I put the 4" risers back on but it looked "Off".
Bought a set of 12" El Diablo's for Demon Cycle, Took them out of the box and held them in place.
I knew I was going to have to extend everything, so I went with the 14".
10" before
14" now
The following users liked this post:
Demons Cycle (06-28-2021)
#33
I had stock 10" Buckhorns on 4" risers, Went with 10" mini apes on 1.5" risers so the wires and cables would reach, but missed the height.
I put the 4" risers back on but it looked "Off".
Bought a set of 12" El Diablo's for Demon Cycle, Took them out of the box and held them in place.
I knew I was going to have to extend everything, so I went with the 14".
10" before
14" now
I put the 4" risers back on but it looked "Off".
Bought a set of 12" El Diablo's for Demon Cycle, Took them out of the box and held them in place.
I knew I was going to have to extend everything, so I went with the 14".
10" before
14" now
#34
The original setup with the 4" risers gave me 14"
The setup you see only gave me 11.5", I missed the 2.5"
The new setup gives me 15.5". The extra 4" made a difference in comfort for me.
Last edited by RANGER73; 02-11-2019 at 12:30 PM.
#36
The following users liked this post:
GarageJockey (02-13-2019)
#37
The following users liked this post:
Demons Cycle (06-28-2021)
#38
Would you mind to send me more shots of your bike especially from the side?
this is what I dig as am looking for long ride comfort. Anything taller will be pain on 300+ miles day. I want to go with wide (at least 32”) as this was really comfortable width on my sportster where I had handlebar from Softail DeLuxe. How much longer did you have to go on cables for brake, cluch and throttle withe these 10” rise?
#39
#40
I had stock 10" Buckhorns on 4" risers, Went with 10" mini apes on 1.5" risers so the wires and cables would reach, but missed the height.
I put the 4" risers back on but it looked "Off".
Bought a set of 12" El Diablo's for Demon Cycle, Took them out of the box and held them in place.
I knew I was going to have to extend everything, so I went with the 14".
10" before
14" now
I put the 4" risers back on but it looked "Off".
Bought a set of 12" El Diablo's for Demon Cycle, Took them out of the box and held them in place.
I knew I was going to have to extend everything, so I went with the 14".
10" before
14" now
Big Al.