Deuce wide-tire kit 44075-04
#1
Deuce wide-tire kit 44075-04
With this kit I can bump up from the stock 160 to a 180 tire. Comes "with everything you see here" except for the required swingarm (ala 47637-04).
Does anyone know if the Wide Swingarm for Deuce models (47637-04) is the same as the OEM wide swingarm on all 06-newer FX models? I've got a take-off 2006 FX swingarm (had 200 tire in it OEM) I could use with this wide tire kit on my wife's Deuce if it'll fit. Will it fit.........more specifically, is it an acceptible substitute for 47637-04?
Asking is easier than installing it to find out. Thanks.
Does anyone know if the Wide Swingarm for Deuce models (47637-04) is the same as the OEM wide swingarm on all 06-newer FX models? I've got a take-off 2006 FX swingarm (had 200 tire in it OEM) I could use with this wide tire kit on my wife's Deuce if it'll fit. Will it fit.........more specifically, is it an acceptible substitute for 47637-04?
Asking is easier than installing it to find out. Thanks.
#3
RE: Deuce wide-tire kit 44075-04
Here's the kit I'm putting on.....200 tire kit....fits swing arm and fender.
http://www.hogpro.com/showpage.php?page=main.htm
http://www.hogpro.com/showpage.php?page=main.htm
#4
Deuce 44075-04 Wide Tire Kit Instructions/Parts List
Found instructions, no longer need 44075-04 kit instructions. Thanks. Does anyone have an Instruction sheet or Parts list for Deuce 44075-04 Wide Tire Kit that could be scanned and sent to me? I have a 44075-04 kit I am going to sell and want to make sure I have all of the parts for the kit. Can't get any information from Harley. Thanks, Terry
Last edited by Deuce720; 07-18-2011 at 09:04 PM.
#5
#6
#7
you dont need special swing arm or any other mods to go 180 on a deuce
you can get a SE 180 dunlop, which isnt really a true 180
or you can do what i did and get a 18x 5.5 wheel and put a 180 tyre on, i only had to get slightly smaller drive side axle spacer for this application
with this wheel i can now easily go to a 200 wide tyre with only mods required are the narrower 07 belt and pulley ,still stock swingarm, deuce rear fender will just take it
you can get a SE 180 dunlop, which isnt really a true 180
or you can do what i did and get a 18x 5.5 wheel and put a 180 tyre on, i only had to get slightly smaller drive side axle spacer for this application
with this wheel i can now easily go to a 200 wide tyre with only mods required are the narrower 07 belt and pulley ,still stock swingarm, deuce rear fender will just take it
The following users liked this post:
Muiren (05-27-2017)
Thread
Thread Starter
Forum
Replies
Last Post
Deuce720
General Topics/Tech Tips
0
07-13-2011 03:05 PM