Evo pipes onto 96 twin cam?
Hi all, I have some V&H Bigshots of an Evo and was wondering if anyone knows if these will fit onto 96TC engine with minimal drama. Any info, suggestions or Gyp appreciated. Thanks
|
I "think" they have the same size head connections but the frame mountings may give you a problem because of the wider frame width at the rear.
You'll also need to add O2 bungs for the ECM unless you use eliminators and welding them on is not going to do much good to the chrome in the immediate area. |
Most just get the pipes that fit the bike we have.
instead of messing up a good set of Evo pipes, trying to make them work on Urs, why not just sell them and buy some that's made for Ur bike. |
You'll have to add the sensor bung or bungs depending on your year,otherwise it will bolt up.Put them in on the back side of the heat shields and you won't ruin any chrome.Lots of part retailers sell the bungs for 8.00 each.Drill the holes yourself and if you can't weld any shop will more than likely do it for a little cash. A lot cheaper than buying a new set of pipes if you like the ones you have.
|
Awesome thanks for the replies guys.. they are actually V&H Shortshots, i have someone sorted for the o2 bungs, i brought these pipes new and think they will look alright, plus i'm partial to the Vulgar sound of the 2 1/4 pipes with no baffle hahaa :) thank everyone
|
All times are GMT -5. The time now is 04:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands