blackline sissy bar and license plate ?
#11
All you have to do is grind off about am eighth of a inch of the release buttons or get art alloy strut blinkers,i ground mine and ended up getting the aa anyways.....
http://i1087.photobucket.com/albums/...IMAG0452-1.jpg
http://i1087.photobucket.com/albums/...IMAG0452-1.jpg
#12
#13
No ..... Made sure of that before i bought it.. I first heard you had too, moving them down to the licence plate(even a pic of them moved) dealer had already fitted one and told me no need since there is an additional spacer kit. hope that helps...the kit i believe are for the indicator stems to move outwards for clearance for the levers.. but they still remain in the same spot.
#14
This is what you need if you want to keep the lights in the stock location.
Also lets you get the cargo rack. BUT it isn't really designed for 3 wires to run through it. Had to have the dealer replace 3 struts until I decided to get a side mount plate and remove the running lights from the signals.
Also lets you get the cargo rack. BUT it isn't really designed for 3 wires to run through it. Had to have the dealer replace 3 struts until I decided to get a side mount plate and remove the running lights from the signals.
#15
Has anybody tried to make a bracket that would drop those turn signals down? I think the sissy bar would clear if that was the case. I just bought all the necessary stuff to put mine on as well and am scratching my head trying to figure out how to do this without relocating the signals and/or grinding the sisssy bar plates...
#19
tail lights
This is what you need if you want to keep the lights in the stock location.
Also lets you get the cargo rack. BUT it isn't really designed for 3 wires to run through it. Had to have the dealer replace 3 struts until I decided to get a side mount plate and remove the running lights from the signals.
Also lets you get the cargo rack. BUT it isn't really designed for 3 wires to run through it. Had to have the dealer replace 3 struts until I decided to get a side mount plate and remove the running lights from the signals.