Softail Custom Pictures
#1381
#1382
#1383
RE: Softail Custom Pictures
Hi douglassaunders
Welcome.
I can't see the pic either.
Post another so we can have a look.
Theirs info on posting in the FAQ section.
 \\;
Ride Safe
Welcome.
I can't see the pic either.
Post another so we can have a look.
Theirs info on posting in the FAQ section.
 \\;
Ride Safe
#1385
RE: Softail Custom Pictures
Anybody know if "HEARTLAND USA" have a dealership or supplier in the UNITED KINGDOM ?
 \\;
i have sorta taken a \\;shine to their E-Z 200 KIT ....check it out! ( i would give you the link if i knew how!)
[IMG]local://upfiles/52855/09C51E4DE6CD483FA0AD52BA91AAEE21.jpg[/IMG]
[IMG]local://upfiles/52855/16D68DE781154D229EABE383AF1F3C9C.jpg[/IMG]
 \\;
i have sorta taken a \\;shine to their E-Z 200 KIT ....check it out! ( i would give you the link if i knew how!)
[IMG]local://upfiles/52855/09C51E4DE6CD483FA0AD52BA91AAEE21.jpg[/IMG]
[IMG]local://upfiles/52855/16D68DE781154D229EABE383AF1F3C9C.jpg[/IMG]
#1386
RE: Softail Custom Pictures
My box of gear arrived from the US the other day. Fitted the LePera Bare Bones (LK-007) tonight. Not in the best light, but took a few pics.
 \\;
 \\;
Need to find a nice chrome bolt for that rear mount though. Had to go and buy a torx bit set with a T45 bit to change out the rear fender strut bolts. After installing the seat I changed out the bolts for the front brake rotor, then started on the rear. The rear ones are bloody tight!! Got two done then snapped the tip off my T45 torx on the third. My torx bits are the tamperproof type with the hollow end... I reckon I'll have to find some solid ones and try again, giving the bolts a tap and maybe a bit of heat first.
 \\;
Also installed an Arlen Ness Big Sucker, instead of the stock air box with a K&\\;N filter. Reckon I'll try a round cover instead of the football. Can't wait to take her out for a spin in the morning.
 \\;
 \\;
Need to find a nice chrome bolt for that rear mount though. Had to go and buy a torx bit set with a T45 bit to change out the rear fender strut bolts. After installing the seat I changed out the bolts for the front brake rotor, then started on the rear. The rear ones are bloody tight!! Got two done then snapped the tip off my T45 torx on the third. My torx bits are the tamperproof type with the hollow end... I reckon I'll have to find some solid ones and try again, giving the bolts a tap and maybe a bit of heat first.
 \\;
Also installed an Arlen Ness Big Sucker, instead of the stock air box with a K&\\;N filter. Reckon I'll try a round cover instead of the football. Can't wait to take her out for a spin in the morning.
#1388
#1389
#1390
RE: Softail Custom Pictures
ORIGINAL: harley_nova
Hey Scooter, Let us know how the seat feels. I have the same bike. That seat looks sick. Was it hard to install?
 \\;\\\\\\;
Cheers,
Hey Scooter, Let us know how the seat feels. I have the same bike. That seat looks sick. Was it hard to install?
 \\;\\\\\\;
Cheers,
This is a pic thread... so here's some more.