Pardon my dumb question...since I am also planning to install batwing fairings on my fork, I noticed your mounts are below the lower triple tree. what part of the fork is stationary and what part moves as the suspension for the front wheel. I am assuming the lower portion of the fork below the triple tree is the moving part.
The whole upper part is basically stationary; it plunges down into the lower part. The shiny parts, the fork tubes, plunge into the dull parts (don't know correct name).
The whole upper part is basically stationary; it plunges down into the lower part. The shiny parts, the fork tubes, plunge into the dull parts (don't know correct name).
hmmmmmmm so if you install the turn signal clamp below the lower triple tree, the turn signal it will move when you hit a bump or hole in the road?
DK black Sano's on the lower tree so used LED's on the upper signals. Works perfectly with the windshield. Eventually thinking of Custom Dynamics Dynamic Ringz for them.
These arrived this morning. Considering they were under £10 delivered they don't look that bad a finish to them! Good job they were cheap as I suspect I wont stick with them as i like the triple bolt replacement ones now! :doh:
10-23-2015, 09:13 PM
