2016 Roadster CX - Club Style Build
#111
#112
I hear that. Finishing all my mods and service now so when the warm weather is here, all I do is ride the Harley.
Revzilla is not the only online store LoL. JP and Dennis Kirk, Ebay, Amazon, etc. has the black gauge holder.
Revzilla is not the only online store LoL. JP and Dennis Kirk, Ebay, Amazon, etc. has the black gauge holder.
#114
Finally finished up the Roadster. I was overthinking too much about the
integration of tail lights and the MoonsMC and the answer was just very simple.
I did not want to molest my stock turn signal wiring so I made my own improvement on the MoonsMC.
Extended the wires and changed the pins and plug so that it will just hook up to the stock harness.
(Not using the MoonsMC turn signal).
Run lights and Brake Lights.
integration of tail lights and the MoonsMC and the answer was just very simple.
I did not want to molest my stock turn signal wiring so I made my own improvement on the MoonsMC.
Extended the wires and changed the pins and plug so that it will just hook up to the stock harness.
(Not using the MoonsMC turn signal).
Run lights and Brake Lights.
#115
After the fairing was taken care of, it was time to do the gauge. Very straight forward. Unplug the wiring harness. Splice and solder the wires. 20 gauge. Tape it up and seal it.
I have a Hard Case Performance Risers so I used their gauge mount. Looks so much better and functional. No more looking down!!!
I have a Hard Case Performance Risers so I used their gauge mount. Looks so much better and functional. No more looking down!!!
Last edited by jrogerb144; 04-06-2018 at 10:13 AM. Reason: Spelling
#116
I fab'd some rubber bushings to secure the riser and absorb the vibration.
Rob at 1wheelrevolution posted on his IG his new riser bushings to fit the Roadster tree. You may want to wait on that.
#117
Thanks. For right now, I'm just running some grade 8 washers under the risers. His bushings do look like a nice solution though.
The following users liked this post:
Jonathanvillada (04-02-2020)
#119
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,344
Received 2,189 Likes
on
1,677 Posts
The following users liked this post:
Branstner (04-15-2018)
#120
I have searched their website high and low and cannot find that gauge mount on there now anywhere. Just a different bracket style mount that attaches to risers. Anyone still have a link or any info how to find it?
Last edited by schorched73; 06-30-2018 at 01:28 PM.