What did you do to Your Sportster Today?
#2331
Join Date: Jan 2010
Location: western shore of Gitche Gumee
Posts: 747
Received 208 Likes
on
155 Posts
I had an Unscheduled Oil Change!
Riding the bike to the shop I rode up a lip onto the walkway. Parked and went into the shop.
About 30 minutes later I stepped outside and did a double-take! There was a big puddle under my bike, and it was growing!
I took a quick look and saw it was coming out the oil tank drain hose, around the plug.
Devin grabbed a drain pan and some towels.
Here's a pic of us part way through mopping up the oil.
After all the oil finished draining out, it was easy to see what had happened.
The hose clamp had got pinched between the cement lip and the frame, deforming it. It no longer was keeping the hose in a tight seal around the plug.
I have ridden up that lip onto the walkway dozens of times...but this time it caught that hose just "right".
We put the plug back in with a new hose clamp, replaced the oil with some new oil.
And NOW I have done what I always thought about doing, but never did....zip-tied that hose up so it is no longer the lowest hanging part at the bottom of the bike.
Riding the bike to the shop I rode up a lip onto the walkway. Parked and went into the shop.
About 30 minutes later I stepped outside and did a double-take! There was a big puddle under my bike, and it was growing!
I took a quick look and saw it was coming out the oil tank drain hose, around the plug.
Devin grabbed a drain pan and some towels.
Here's a pic of us part way through mopping up the oil.
After all the oil finished draining out, it was easy to see what had happened.
The hose clamp had got pinched between the cement lip and the frame, deforming it. It no longer was keeping the hose in a tight seal around the plug.
I have ridden up that lip onto the walkway dozens of times...but this time it caught that hose just "right".
We put the plug back in with a new hose clamp, replaced the oil with some new oil.
And NOW I have done what I always thought about doing, but never did....zip-tied that hose up so it is no longer the lowest hanging part at the bottom of the bike.
Last edited by hammer6315; 02-09-2016 at 12:23 PM.
#2332
In Progress
Cut the struts, Cut up the fender, mock mounted it, mock mounted the DK Customs headlight and bracket, relocated speedo, threw on the Sporty 8 seat (Awesome BTW)
Have to reshape the fender, LED rear lights, white walls and powder coat to come!
@dexrodriguez , Nice colors
#2333
#2335
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,356
Received 2,195 Likes
on
1,681 Posts
more junk appeared
#2336
#2337
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,356
Received 2,195 Likes
on
1,681 Posts
#2340
Join Date: Sep 2012
Location: Tallahassee, Florida
Posts: 12,356
Received 2,195 Likes
on
1,681 Posts