Gorilla handle bar clamp
 

A while back I changed out my stock bars to some aftermarket bars, if I pull a bit harder on the bars, they will slide down towards the tank. I have ordered a clamp that is supposed to eliminate the lose bar scenario. They have 3 set screws that are between the stock bolts holes that tighten the bars to the risers
Has anyone else out there changed out their bars and used this product or something similar. How did it work out for you. Were you, or are you happy with the new set up??
TIA

I used the Bagger Nation clamp when I installed apes on my 03 EG. very simple to use and it eliminated the exact problem your having. I didn't trust the dry lock tite that came on it though, I used permanent lock tite on the three set screws. Good luck.