Has anyone installed a cruise control on there street glide? Is it as simple as just changing the right control and plug it in?

 

A little more complicated than that, but not too bad if you follow the instructions.

 

I thought the 08's came standard with CC?

 

Simple install BUT it must be "flashed" by the dealer. I hear it costs somewhere around $18.00 for the "flash", right Karl......

 

08 is fly-by-wire different then 07's and b-4 , I would get a owners manual.

 

Yes. The right control switch housingis replaced. The throttle actuator isattached tothe throttle body.
No need for the old style servo unit to be installed as part of the kit. Just the switch housing. As far as initializations goes. I`m not sure if it needs to be activated in the ECM of if it will function automatically. Either way it`s a fairly easy installation.

 

Two dealers in DFW area say they are not out yet.

Know where they are selling them? Be glad to buy em.

 

that's what i thought too. i guess we were wrong. i installed it on my 07 but i guess it's different with the 08's.

 

The H-D 2008 book shows part # 77196-08 fits the FLHX, FLHT and FLHTC
The book states it`s available Sept. 2007 $$239.00 bucks. per the book.

[IMG]local://upfiles/38214/76D6062AD2A940099BB772DDC96199E7.jpg[/IMG]

 

The 08`s don`t use the servo because the fly-by-wire system has a throttle actuator attached to the throttle body. The ECM already controls the throttle so there's no need for the servo. It makes it simple and cheaper too.