Help...Magnetic doors for lowers
12-26-2011, 12:17 PM
Join Date: Oct 2008
Location: Indiana
Posts: 205
Help...Magnetic doors for lowers
How did you remove the push pins on the stock doors? The instructions say to use pliers, but that's not working. Any advise?
Thanks!
12-26-2011, 12:21 PM
Join Date: Oct 2007
Location: New England
Posts: 4,106
Originally Posted by
tringle
How did you remove the push pins on the stock doors? The instructions say to use pliers, but that's not working. Any advise?
Thanks!
I used a small pair of wire cutters and cut the pins from the inside...then they just pop right out.
12-26-2011, 12:42 PM
Join Date: Oct 2009
Location: Al/FL
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
second that, just cut flush from the insides and push out.
12-26-2011, 12:52 PM
Join Date: Mar 2010
Location: Nashville TN
Posts: 1,013
Received 0 Likes
on
0 Posts
Originally Posted by
Pine Tree
I used a small pair of wire cutters and cut the pins from the inside...then they just pop right out.
Exactly what i did or needle nose pliers you have to work a little to get them out.
12-26-2011, 01:23 PM
Join Date: Jul 2011
Location: wise VA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
third that cut off inside and pull out
12-26-2011, 02:20 PM
Join Date: Oct 2008
Location: Indiana
Posts: 205
Thanks for the help guys. New doors installed!
12-26-2011, 03:23 PM
Join Date: Oct 2011
Location: Minnesota
Posts: 216
Likes: 0
They work great don't they. I can't believe how much of an improvement they are over the stock snap doors.
12-26-2011, 03:33 PM
Join Date: Aug 2011
Location: Pittsburgh
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
12-26-2011, 03:39 PM
Join Date: Mar 2010
Location: The Live Free or Die State
Posts: 805
Likes: 0
+2.... now add the compartment liners!!!!
12-26-2011, 04:33 PM
Join Date: Sep 2010
Location: Eastern PA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by
knewt5
+2.... now add the compartment liners!!!!
+3 such a simple thing that makes a big improvement
