****DK Custom Stage 3 Anodized BLACK Breather Bolts****
#31
Stage 3 Anodized Black Breather Bolts
Kelsey
Kelsey
__________________
Cristy
FREE SHIPPING - ORDERS OF $100 OR MORE - LOWER 48 STATES
www.DKCustom.com
Call: 662-252-8828
Text: 662-420-4891
Email: Support@DKCustomProducts.com
Cristy
FREE SHIPPING - ORDERS OF $100 OR MORE - LOWER 48 STATES
www.DKCustom.com
Call: 662-252-8828
Text: 662-420-4891
Email: Support@DKCustomProducts.com
#32
I was a dumba$$ and over-torqued the breather bolts on my dyna, causing one to snap off.
To anyone installing, be careful not to over-torque, just put them hand tight then just give it a quarter turn or so. (Or make sure your torque wrench is set correctly.)
If anyone does shear off their bolts, I used a #2, 7/64" easy out to get it out, no drilling required.
Thanks to DK for getting new bolts shipped to me so quickly, can't wait for them to get here so I can finish the install.
To anyone installing, be careful not to over-torque, just put them hand tight then just give it a quarter turn or so. (Or make sure your torque wrench is set correctly.)
If anyone does shear off their bolts, I used a #2, 7/64" easy out to get it out, no drilling required.
Thanks to DK for getting new bolts shipped to me so quickly, can't wait for them to get here so I can finish the install.
#33
I was a dumba$$ and over-torqued the breather bolts on my dyna, causing one to snap off.
To anyone installing, be careful not to over-torque, just put them hand tight then just give it a quarter turn or so. (Or make sure your torque wrench is set correctly.)
If anyone does shear off their bolts, I used a #2, 7/64" easy out to get it out, no drilling required.
Thanks to DK for getting new bolts shipped to me so quickly, can't wait for them to get here so I can finish the install.
To anyone installing, be careful not to over-torque, just put them hand tight then just give it a quarter turn or so. (Or make sure your torque wrench is set correctly.)
If anyone does shear off their bolts, I used a #2, 7/64" easy out to get it out, no drilling required.
Thanks to DK for getting new bolts shipped to me so quickly, can't wait for them to get here so I can finish the install.
Kelsey
#35
__________________
www.DKCustom.com
662-252-8828 Voice
662-420-4891 Text & Voice
Support@DKCustomProducts.com
www.DKCustom.com
662-252-8828 Voice
662-420-4891 Text & Voice
Support@DKCustomProducts.com
#36
#39
The following users liked this post:
DK Custom - ST (11-20-2017)