Mutazu Tourpac Mods
Thread Starter
|
Road Captain
Joined: Nov 2007
Posts: 572
Likes: 1
From:
Mutazu Tourpac Mods
Here is a pic of the aftermarket Mutazu tourpac that some love and some hate. 
I put a HD emblem on it (which matches the ones I put on my tank).
The smaller LED is a running light.
The larger LED is a brake light. It can really get the attention of someone behind me if I tap the brakes a few times. lol
I removed the RK Custom tank emblem and replaced it with this one.
I put a HD emblem on it (which matches the ones I put on my tank).
The smaller LED is a running light.
The larger LED is a brake light. It can really get the attention of someone behind me if I tap the brakes a few times. lol
I removed the RK Custom tank emblem and replaced it with this one.
Road Captain
Joined: Jan 2008
Posts: 697
Likes: 2
RE: Mutazu Tourpac Mods
I left you a post on your 'trailer' thread before I saw this one. I'm very interested in the LED's you put on the Tourpak. I've been looking around for something like this Do you mind sharing some info like:
What kind are they?
Where did you get them?
Tips on installing?
Thanks
Steve
What kind are they?
Where did you get them?
Tips on installing?
Thanks
Steve
Road Captain
Joined: May 2007
Posts: 641
Likes: 0
From: Central Iowa
RE: Mutazu Tourpac Mods
ORIGINAL: Aslan
It looks good.
Is there a big $avings over the HD?
Did you have to use HD mounting hardware ot does Mutazu have there own for Harleys?
It looks good.
Is there a big $avings over the HD?
Did you have to use HD mounting hardware ot does Mutazu have there own for Harleys?
Thread Starter
|
Road Captain
Joined: Nov 2007
Posts: 572
Likes: 1
From:
RE: Mutazu Tourpac Mods
ORIGINAL: Aslan
It looks good.
Is there a big $avings over the HD?
Did you have to use HD mounting hardware ot does Mutazu have there own for Harleys?
It looks good.
Is there a big $avings over the HD?
Did you have to use HD mounting hardware ot does Mutazu have there own for Harleys?
Tour pac with standard backrest $110 http://mutazu.com/products.php?cat_i...amp;s=prod.php
Wrap around back rest $69 http://mutazu.com/products.php?s=pro...g=IMG_0523.JPG
It comes with mounting hardware that will work on the standard HD fixed rack or the detachable rack.
I did not use the hardware they sent. I picked up a couple of galvanized steel plates from Home Depot and used them to mount to the HD fixed rack. That added about $10 to the total cost.
Trending Topics
Thread Starter
|
Road Captain
Joined: Nov 2007
Posts: 572
Likes: 1
From:
RE: Mutazu Tourpac Mods
ORIGINAL: capt_caveman
I left you a post on your 'trailer' thread before I saw this one. I'm very interested in the LED's you put on the Tourpak. I've been looking around for something like this Do you mind sharing some info like:
What kind are they?
Where did you get them?
Tips on installing?
Thanks
Steve
I left you a post on your 'trailer' thread before I saw this one. I'm very interested in the LED's you put on the Tourpak. I've been looking around for something like this Do you mind sharing some info like:
What kind are they?
Where did you get them?
Tips on installing?
Thanks
Steve
The larger LED is 50 lights and 14 inches wide. $17.99 from JC Whitney. Part # CBN157504
The smaller ones come with double sided mounting tape. Measured where they were to go, drilled a small hole, cleaned the area with alcohol, ran the wire thru into the trunk and that was it.
The larger one comes with double sided mounting tape and metal brackets. Depending on your application, you can use either or both. Since I mounted this below the pak I did not have much surface for the tape. I ended up using a bit of the tape and the two brackets that came with it.
I have had them on there for about 4k miles, a few downpours, several washings, and they are as sturdy as the day I put them on.
Oh, I did silicone up the holes where the wires come into the pak.
Road Captain
Joined: Jan 2008
Posts: 697
Likes: 2
RE: Mutazu Tourpac Mods
ORIGINAL: Mississippi Bagger
The smaller LED, which I have on the back and either side of the tourpak, is 12 lights, 4.75 inches wide. I got them from JC Whitney for a whopping $11.99 each. Part # CBN139078
The larger LED is 50 lights and 14 inches wide. $17.99 from JC Whitney. Part # CBN157504
The smaller ones come with double sided mounting tape. Measured where they were to go, drilled a small hole, cleaned the area with alcohol, ran the wire thru into the trunk and that was it.
The larger one comes with double sided mounting tape and metal brackets. Depending on your application, you can use either or both. Since I mounted this below the pak I did not have much surface for the tape. I ended up using a bit of the tape and the two brackets that came with it.
I have had them on there for about 4k miles, a few downpours, several washings, and they are as sturdy as the day I put them on.
Oh, I did silicone up the holes where the wires come into the pak.
ORIGINAL: capt_caveman
I left you a post on your 'trailer' thread before I saw this one. I'm very interested in the LED's you put on the Tourpak. I've been looking around for something like this Do you mind sharing some info like:
What kind are they?
Where did you get them?
Tips on installing?
Thanks
Steve
I left you a post on your 'trailer' thread before I saw this one. I'm very interested in the LED's you put on the Tourpak. I've been looking around for something like this Do you mind sharing some info like:
What kind are they?
Where did you get them?
Tips on installing?
Thanks
Steve
The larger LED is 50 lights and 14 inches wide. $17.99 from JC Whitney. Part # CBN157504
The smaller ones come with double sided mounting tape. Measured where they were to go, drilled a small hole, cleaned the area with alcohol, ran the wire thru into the trunk and that was it.
The larger one comes with double sided mounting tape and metal brackets. Depending on your application, you can use either or both. Since I mounted this below the pak I did not have much surface for the tape. I ended up using a bit of the tape and the two brackets that came with it.
I have had them on there for about 4k miles, a few downpours, several washings, and they are as sturdy as the day I put them on.
Oh, I did silicone up the holes where the wires come into the pak.
I like what you've done with your ride. It looks great.
Tourer
Joined: Oct 2007
Posts: 472
Likes: 0
From: Niagara Frontier, NY
RE: Mutazu Tourpac Mods
I'm liking the Matazu Tourpac more and more, I think it looks great on your bike. Is the backrest pad made by Matazu also? The one on their website has button; your doesn't appear to have the buttons.