Mallory Distributor
#1
Mallory Distributor
I am running a Mallory distributor on my 48 pan. Saturday night the cover screws vibrated out and the cover came loose. One of the wires was broken. I fixed the wire but I think the module is also bad now. The bike will fire but it won't run. I was wondering if any of you might know where I can find a replacement module. The part number on the one I have is 6001M.
Thanks,
Woolly
Thanks,
Woolly
#2
I have not used the mallory-
but if you need a replacement sensor unit ( 12 and 6 volt) inside the stock points cover:
http://www.ebeyond2000.net/quickstart.html
which I use on my '53.
It is flawless and worth every penny.
Mike
but if you need a replacement sensor unit ( 12 and 6 volt) inside the stock points cover:
http://www.ebeyond2000.net/quickstart.html
which I use on my '53.
It is flawless and worth every penny.
Mike
#3
Join Date: Oct 2005
Location: Santa Klaus County, Cali
Posts: 7,274
Received 3,222 Likes
on
1,483 Posts
#4
I am running a Mallory distributor on my 48 pan. Saturday night the cover screws vibrated out and the cover came loose. One of the wires was broken. I fixed the wire but I think the module is also bad now. The bike will fire but it won't run. I was wondering if any of you might know where I can find a replacement module. The part number on the one I have is 6001M.
Thanks,
Woolly
Thanks,
Woolly
#5
#6
#7
Trending Topics
#8
#9
I contacted Mallory again. They told me the part number was now A605. I then tried autozone but no luck. I ended up ordering off Mallory's website. $102 total. I hope this takes care of the problem. I tried to start her today and its still doing the same thing. It will fire and thats it.
#10
The following users liked this post:
Uncle Larry (11-14-2023)