Help needed
06-29-2015, 01:55 PM
Join Date: Aug 2013
Location: Ottawa, Canada
Posts: 52
Received 0 Likes
on
0 Posts
Help needed
Hi, i'm in the middle of my install and amp not powered up. power/ground direct to battery. 30amp fuse. Test the amp plug with multi meter and i have 12 V. WTF.
06-29-2015, 02:18 PM
Join Date: Aug 2008
Location: S. FL
Posts: 4,150
You either need to connect both sets of speakers or connect a remote wire to trigger it to turn on.
06-29-2015, 03:16 PM
Join Date: Aug 2013
Location: Ottawa, Canada
Posts: 52
Received 0 Likes
on
0 Posts
i was thinking if i do not flash the radio, the remote wire was not necessary
06-29-2015, 05:42 PM
Join Date: Jan 2014
Location: Green Bay, Wi.
Posts: 651
Quote:
Originally Posted by
arch73
i was thinking if i do not flash the radio, the remote wire was not necessary
That is true, but you have the magic box so your signal is too low. You need the remote turn on.
06-29-2015, 06:14 PM
Join Date: Aug 2008
Location: S. FL
Posts: 4,150
^ ahhh good catch. Learned something new about the 14's and magic box.
06-29-2015, 10:23 PM
Join Date: Aug 2013
Location: Ottawa, Canada
Posts: 52
Received 0 Likes
on
0 Posts
06-30-2015, 08:31 PM
Join Date: Aug 2013
Location: Ottawa, Canada
Posts: 52
Received 0 Likes
on
0 Posts
I forget to ask REM wire gauge size should i use and the cig leed color?
06-30-2015, 09:11 PM
Join Date: Jan 2014
Location: Green Bay, Wi.
Posts: 651
14 gauge is fine. Purple wire on the power port
07-01-2015, 07:59 PM
Join Date: Aug 2013
Location: Ottawa, Canada
Posts: 52
Received 0 Likes
on
0 Posts
07-01-2015, 08:08 PM
Join Date: Oct 2013
Location: Flori-Duh
Posts: 477
When I had the PBR300x2 I wasn't using the magic box, still needed the REM wire.
Here's a easy way to do it, plugs right into the power connector.
06-29-2015, 01:55 PM
Help needed
