Hi guys,

Went to move bike into garage tonight and noticed that I had no tail lights (running lights) but I did have brake lights and rear turn signals.

I removed the rear lens cover and checked the bulb and the two filaments look intake. I have not checked the fuse as of yet.

Just wondering if anyone else has run into this and may have some other things to possibly look at.

Thanks for your time.

Cheers

 

That's normal. Since you have a rear tail light, your rear turn signals only illuminate when you use them as turn signals. You can get a run-brake-turn module to send power to them all the time.

Unless you're talking about the tail light itself?

 

Some early 07's had the tail light harness routed wrong. Check to see that the wires are intact.the rear end, you might have a harness problem.