My FXR2 Build thread
#1
My FXR2 Build thread
I bought this bike a little over a year and a half ago and feel in love with it. I've built a few sporties but this was my first big twin bike.
This is pretty much how it's been since I bought it from a guy in Omaha.
Wide Glide conversion, Thunderheader, tall apes and turn signal delete.
The really big thing I disliked about the old 80 inch was a dog compared to the 1250's I've built in the past. So this winter I decided to change the bike completely. What started out as a "I need a little more power" has turned into a "Let's rebuild the whole damn bike!" project.
The short list of mods
*Ultima 120CI
*Barrnet Clutch
*Mikuni HRS 45
*Stock rear fender
*Narrow Glide Trees
*Racetech fork kit
*SM Pre-Loaders
*Glide Pro motor mounts
*CCE Swingarm bearings
*Adding Turn signals back on
*Ape delete for custom bars
*Powder Coating the frame
So far here are the progress pictures, now I'm in the putting back together stages.
Disassembly=
Last picture of it together with my old man's Dyna
Quick install of the new rear fender
Ripped the Primary apart
Old motor out!
Little 80 inch next to the new 120
Everything out besides wiring
Wiring gone
Ready for blasting and Powder
Frame back from coating
New narrow tree all polished up
Back Together Stages=
Swing arm/Trans back in
The 120 shoehorned into the frame
That's where I'm at right now, next I'll throw the primary on and still waiting on my bars and such to come in from Chrome.
This is pretty much how it's been since I bought it from a guy in Omaha.
Wide Glide conversion, Thunderheader, tall apes and turn signal delete.
The really big thing I disliked about the old 80 inch was a dog compared to the 1250's I've built in the past. So this winter I decided to change the bike completely. What started out as a "I need a little more power" has turned into a "Let's rebuild the whole damn bike!" project.
The short list of mods
*Ultima 120CI
*Barrnet Clutch
*Mikuni HRS 45
*Stock rear fender
*Narrow Glide Trees
*Racetech fork kit
*SM Pre-Loaders
*Glide Pro motor mounts
*CCE Swingarm bearings
*Adding Turn signals back on
*Ape delete for custom bars
*Powder Coating the frame
So far here are the progress pictures, now I'm in the putting back together stages.
Disassembly=
Last picture of it together with my old man's Dyna
Quick install of the new rear fender
Ripped the Primary apart
Old motor out!
Little 80 inch next to the new 120
Everything out besides wiring
Wiring gone
Ready for blasting and Powder
Frame back from coating
New narrow tree all polished up
Back Together Stages=
Swing arm/Trans back in
The 120 shoehorned into the frame
That's where I'm at right now, next I'll throw the primary on and still waiting on my bars and such to come in from Chrome.
#2
#6
Hmm...that Triple Tree looks pretty close to what I mentioned for you to get if you wanted a stock set when you were looking for answers in the thread link below. Since you never came back with any response, I guess now it must have worked out
FXR Aftermarket Triple Tree's
"My FXR2 has wide tree's on it, I wanna take it back to a Narrowglide. The FXR2 has the bottom mount headlight so an aftermarket tree set up is easier to find than stock trees for a bottom mount"
https://www.hdforums.com/forum/dyna-...l#post15628322
FXR Aftermarket Triple Tree's
"My FXR2 has wide tree's on it, I wanna take it back to a Narrowglide. The FXR2 has the bottom mount headlight so an aftermarket tree set up is easier to find than stock trees for a bottom mount"
https://www.hdforums.com/forum/dyna-...l#post15628322
Last edited by multihdrdr; 01-30-2017 at 06:44 PM.
#7
Trending Topics
#9
#10