Run-brake only
#1
Run-brake only
Well I'm almost done with my build and I got to my worst ability... Wiring. Now to start off I bought bullet style turn signals with dual filaments. Before I knew they made a kit for single for run-brake-turn. I want turns to act as run-brake, no turn. Is there any way I can do this?
Brown
Black
Orange/white
Red yellow
Purple
Plugged in from the bike
Red
Black
Black/white
From aftermarket lights
I also have to tie in plate lights in there somewhere as well.
If I have to get the kit I have to get the kit. Much rather just tie some wires together than make yet another order. The kit looks like its plug and play but previous owner had it all sorts of hacked so I no longer have plugs except for the one going to the main harness. Not sure if I even had any other plugs in the first place.
Oh and 07 FXD
Any help would be great
Thanks
Brown
Black
Orange/white
Red yellow
Purple
Plugged in from the bike
Red
Black
Black/white
From aftermarket lights
I also have to tie in plate lights in there somewhere as well.
If I have to get the kit I have to get the kit. Much rather just tie some wires together than make yet another order. The kit looks like its plug and play but previous owner had it all sorts of hacked so I no longer have plugs except for the one going to the main harness. Not sure if I even had any other plugs in the first place.
Oh and 07 FXD
Any help would be great
Thanks
#4
Thread
Thread Starter
Forum
Replies
Last Post