Well I finally did it... Took the scoot.. 03 Superglide from 88 to around 95"
This is a list if what's been done.. V & H Big shots, Andrews 26g cams, k&n breather, Dan baisley pro street heads.. Screaming eagle forged pistons 10.5 to 1..
Still going thru the break in period... What is your best guess at hp and torque numbers ?
Have not put it on dyno yet as the motor still needs to break in..

 

C'mon all...
83 views and nobody has a guess or a comment!
I'm not holding anybody to anything.. Just curious about what
the best guess was

 

sorry, too distracted by your avatar, after I read "Well I finally did it....." I stopped reading....




my guess would be 103hp and 98ft. let me know what I win

 

On the website nightrider.com there is a list of HP/Torque results with each build and various combinations there of. Check out the site, you'll have to dig a little. Have fun with your build.

 

My bike is similar in size and also has a 26G cam. It runs 85 HP and 95 lbs/ft torque but with MM injection and stock heads.

So I will guess yours at 95 to 100 HP and torque just over 100 ft/lbs.
(1 HP per cubic inch is relatively common.)

Let us know what it turns out to be.

 

Same here, didn't realise there was a question

 

I know this is an old thread, but the question was never answered. I have a similar build, but without head work. I'm very curious what this combo does with head work, because I'm thinking of spending the money on getting my heads ported.

 

...that could be taken so many different ways!

 

My guess is 95hp / 109tq

 

i would think a 03 motor bored to 95" with stock heads and a 26n cam would have trouble hitting that 95 horses. Upper 80's yes but 95 just seems a tad wishful to me. But TQ would be around 105 or maybe tad better i think