Lifters revisited
#1
Lifters revisited
Tried the Johnson lifters made for Ultima and fails the Woods cam, heavy spring pressure, hot idle test. Has the sewing machine idle sound but no performance issues, I noticed the quick bleed off time when adjusting them and felt the idle quietness was going to an issue. Ran 3 back to back 6200 rev limiter tests and never faded off like the wounded "B's" that were replaced so the Johnsons will stay in there until I come back from high dollar lifter land which might be awhile, big picture is you get what you pay for.
Someone on here mentioned earplugs is a great diagnostic tool, the plugs would be alot cheaper than big dollar lifters and I do get wind blast in the ears so plugs might be a no brainer
Someone on here mentioned earplugs is a great diagnostic tool, the plugs would be alot cheaper than big dollar lifters and I do get wind blast in the ears so plugs might be a no brainer
#2
I swapped out some Jim's Big Axel lifters for Johnson lifters last year. They took longer to bleed down than the Jim's, but still noisy like you say. I did notice an improvement (not silent, but I think that the price we pay for high lift) when I put in some Rivera Taperlite push-rods. Maybe it's not all lifter noise?
#3
#5
Thread
Thread Starter
Forum
Replies
Last Post