Looking for a PCIII Map
#1
Looking for a PCIII Map
I have a TC88 with se204 cams and, I guess, a Stage I intake. Not sure what the difference is between Stage I and II intakes. My intake was installed by previous owner and looks like a K&N type filter that must be oiled. It is completely exposed, except front cover which does not cover filter material at all.
I am about to install a V&H 2-1 Big Radius exhaust and am wondering if anyone has a map for this setup? Bike is 2001 fuel injected and currently has V&H BSS. At the time I did cams there were not any Power Commander maps for the 204 and we used a map for 203 cams instead. I am going to do a big bore kit in the next month or so, so I do not want to spend $$$ getting it tuned now, but would like a map that is pretty close until then. Any help is appreciated.
I am about to install a V&H 2-1 Big Radius exhaust and am wondering if anyone has a map for this setup? Bike is 2001 fuel injected and currently has V&H BSS. At the time I did cams there were not any Power Commander maps for the 204 and we used a map for 203 cams instead. I am going to do a big bore kit in the next month or so, so I do not want to spend $$$ getting it tuned now, but would like a map that is pretty close until then. Any help is appreciated.
#2
I have a TC88 with se204 cams and, I guess, a Stage I intake. Not sure what the difference is between Stage I and II intakes. My intake was installed by previous owner and looks like a K&N type filter that must be oiled. It is completely exposed, except front cover which does not cover filter material at all.
I am about to install a V&H 2-1 Big Radius exhaust and am wondering if anyone has a map for this setup? Bike is 2001 fuel injected and currently has V&H BSS. At the time I did cams there were not any Power Commander maps for the 204 and we used a map for 203 cams instead. I am going to do a big bore kit in the next month or so, so I do not want to spend $$$ getting it tuned now, but would like a map that is pretty close until then. Any help is appreciated.
I am about to install a V&H 2-1 Big Radius exhaust and am wondering if anyone has a map for this setup? Bike is 2001 fuel injected and currently has V&H BSS. At the time I did cams there were not any Power Commander maps for the 204 and we used a map for 203 cams instead. I am going to do a big bore kit in the next month or so, so I do not want to spend $$$ getting it tuned now, but would like a map that is pretty close until then. Any help is appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
bazzhed
Ignition/Tuner/ECM/Fuel Injection
1
07-22-2011 10:17 AM