Cams for 2014 dyna street bob
#1
#4
Have 204's and very happy with my decision. Do some more searching...you'll be hard pressed to find bad Intel on that cam. Only downfall to it is that it probably doesn't lend well to future upgrades; compresson, high flowing heads, etc. but for a bolt in job on a stock motor with intake and exhaust only, I'd say it's a very tough act to beat! One bit of info I learned doing homework was that stock heads don't flow any better past .500" of valve lift. The 204 is perfect right at .508. I made 93 hp / 108 ft-lbs with 204's, intake, and pipes and very nice torque curve. And you have a 103...they'll fit.
Thread
Thread Starter
Forum
Replies
Last Post