Need New Toys For My Breakout, Any Ideas?
#1
Need New Toys For My Breakout, Any Ideas?
So I've replaced most basic bolt on items on my Breakout and a few other cool toys but am looking for my next mod and need some ideas. Here is what I've done so far:
- Willie G Grips
- Willie G Brake pedal
- Willie G Shifter peg
- Willie G Passenger pegs
- Willie G Driver pegs
- Willie G mirrors
- HD Front/Rear LED Turn/Brake Signals
- Chrome Glow Fender LED Turn/Brake Light (Not installed yet)
- Clutch cable cover
- Fuel line cover
- Banjo bolt covers
- Brake reservoir covers
- Rear axle bolt covers
- Pivot bolt cover
- Front axle bolt covers
- CVO speedo/tach
- Daymaker LED headlight w/ visor extension
- Flush gas cap
- Blackline tank console
- Engine fin covers
- RSD Clarity Air Cleaner
- BCT baffles w/ gutted slip ons
- Dynojet Power Vision module
- Chrome belt guards
- Swingarm solo bag
- Shotgun shocks
I'm on the fence to have my bike wrapped in vinyl after Thanksgiving to switch up the look since it's reversible and only $300. Any other ideas folks?
Things I'm waiting to purchase still:
- Exhaust from Rinehart or Arlen Ness (Magnaflow) when available
- Custom paint job
- Heartland front fender
- Danny Gray or Bitchin Seat solo seat when available
Now help me spend my money.....
- Willie G Grips
- Willie G Brake pedal
- Willie G Shifter peg
- Willie G Passenger pegs
- Willie G Driver pegs
- Willie G mirrors
- HD Front/Rear LED Turn/Brake Signals
- Chrome Glow Fender LED Turn/Brake Light (Not installed yet)
- Clutch cable cover
- Fuel line cover
- Banjo bolt covers
- Brake reservoir covers
- Rear axle bolt covers
- Pivot bolt cover
- Front axle bolt covers
- CVO speedo/tach
- Daymaker LED headlight w/ visor extension
- Flush gas cap
- Blackline tank console
- Engine fin covers
- RSD Clarity Air Cleaner
- BCT baffles w/ gutted slip ons
- Dynojet Power Vision module
- Chrome belt guards
- Swingarm solo bag
- Shotgun shocks
I'm on the fence to have my bike wrapped in vinyl after Thanksgiving to switch up the look since it's reversible and only $300. Any other ideas folks?
Things I'm waiting to purchase still:
- Exhaust from Rinehart or Arlen Ness (Magnaflow) when available
- Custom paint job
- Heartland front fender
- Danny Gray or Bitchin Seat solo seat when available
Now help me spend my money.....
Last edited by Harley_Charley; 11-21-2013 at 06:01 PM.
#2
Willie G key, alarm with siren, driver pegs, brake/clutch lever, storage cover, bullet headlamp bucket, LED rear brake/lights, LED oil check, CVO wheels, primary cover, timing cover, head bolt covers, sideways license plate holder.
How about updated pics on that bad boy?
Are the rear axle bolt covers Kuryakyn 8200?
How about updated pics on that bad boy?
Are the rear axle bolt covers Kuryakyn 8200?
Last edited by scootie; 11-21-2013 at 12:00 AM.
#3
#5
Curious to know what you used for the pivot bolt covers - exhaust side is very close to exhaust bracket?
Not that I'd go this far but you still have lower cylinder cover, lifter covers, tranny shroud cover, starter cover, voltage regulator cover or a front spoiler. and on, and on, and on...
Not that I'd go this far but you still have lower cylinder cover, lifter covers, tranny shroud cover, starter cover, voltage regulator cover or a front spoiler. and on, and on, and on...
Last edited by BlessedHellride; 11-21-2013 at 05:43 AM.
#7
If yer just itchin to throw cash at a Breakout, I have one that needs some attention! But honestly man you have quite a lot of add-ons, you might start having to have some custom work done. If you're trying to set yours apart from others custom paint and fender work has high visibility. How about some custom bars?
Trending Topics
#8
#9
Willie G key, alarm with siren, driver pegs, brake/clutch lever, storage cover, bullet headlamp bucket, LED rear brake/lights, LED oil check, CVO wheels, primary cover, timing cover, head bolt covers, sideways license plate holder.
How about updated pics on that bad boy?
Are the rear axle bolt covers Kuryakyn 8200?
How about updated pics on that bad boy?
Are the rear axle bolt covers Kuryakyn 8200?
Curious to know what you used for the pivot bolt covers - exhaust side is very close to exhaust bracket?
Not that I'd go this far but you still have lower cylinder cover, lifter covers, tranny shroud cover, starter cover, voltage regulator cover or a front spoiler. and on, and on, and on...
Not that I'd go this far but you still have lower cylinder cover, lifter covers, tranny shroud cover, starter cover, voltage regulator cover or a front spoiler. and on, and on, and on...
Maybe the 2014 ones, I don't like the 2013 chrome ones at all.
If yer just itchin to throw cash at a Breakout, I have one that needs some attention! But honestly man you have quite a lot of add-ons, you might start having to have some custom work done. If you're trying to set yours apart from others custom paint and fender work has high visibility. How about some custom bars?
Brakes, whatcha thinking? Didn't think about brakes. You know my deal on the exhaust, waiting still since I don't want to d!ck around with my oil lines and I was supposed to get some stuff powder coated but some asshat didn't wait for me to do it, wonder who that was, haha????