I know this is a long shot but...
Purchased a 2010 Iron with a Wiseco Tuner, Rush 2.25" slipons and Big Sucker
intake. Seems to have flat spots and run poorly in general. Have been to
Wiseco website for info. Tried the base tune, not much better. Read instructions changed a few settings, again not running much better.
Does anyone know what settings would work given the above info.
Have found info that the Wiseco is a "Dobeck style" tuner.
Any help appreciated.

 

Not familiar with the Wiseco tuner (didnt know they even made one...)

Is it a piggyback or a real tuner like the PowerVision or TTS? (Does it ride with you or does it flash the ECM)

Any 883 Stage I map offered should get you to a rideable starting point.

 

It is a piggyback tuner. Shows flashing LED's to add or subtract fuel from
various areas supposedly to be tuned like a carb. The base tune is somewhat ridable but results in a very poor running bike. Likely will have to remove and try something else-not much info or help available for this model. Thanks for the reply.

 

Sorry I couldnt help more, I am not familiar with the kit.

The two tuners I mentioned are what I would look into if you do end up swapping it out. A little more money but A LOT better than everything else out there.