Putting a detach tourpak on 012 Ultra what do you do with relocating the license plate Thanks

 

Look up the company Softbrake (i'm sure thats what it was called) i think it will beable to help ya

 

Softbrake relo bracket, Radiantz LED plate frame. Rock with it.

 

Yep, softbrake. Worked great on my Ultra. Here is the link.

http://www.softbrake.com/shop/produc...dgroup=license

 

I drilled the 3 holes and put a lay down on mine.I like it but I'm cheap.

 

Get the turn light bar off a '09 up standard or road king with the license light and mount under the light. I got the bar and lights (no license bracket) off my '09 standard on a shelf if ya want it, $125 shipped.

 

There ya go...that is what I did to my 09 classic.

 

Here is a thread I started about relocating mine:
https://www.hdforums.com/forum/touring-models/827552-ultra-limited-to-road-king-style-license-plate-relocation.html

 

I have the rear signal bar and plate mount from a 2010 RK on my 09 FLHTC.

2 bolts, reachable with out dropping the tire.

the signal bar is narrower than the Ultra, and has LED in the curved part- this requires splicing into the tip or tail light- quick and easy

mine was a take off from another rider, about $75 with the taillight lens ( no window for plate light on top)




Mike

 

Used a Lazer Star LSM100 mount that goes behind the turn signal bar. Mounted a 6" Radianzt License plate light 8200-52 above the plate at the top of the mount. I was going to use a RK tail light lens without the window in the top but didnt need it. Only took about 2 hours to install.