New to Harley and need help already
#1
New to Harley and need help already
Hey fellow riders,
First I'd like to introduce myself My name is Ed and I own a street glide special; hence the special_eddie. It is my first Harley.
I am looking for some help....I replaced my stock pipes with Vance & Hines power duals and now I am getting popping through the intake and a pinging noise. What did I do wrong? My bike is throwing codes for lean cylinders and rich cylinders as well (131,132,151 and 152).
Other pertinent info, my intake is Vance & Hines and I have FP3 map too.
I have contacted Vance and Hines and they are telling that it is a bad o2 sensor. I didn't do anything with the o2 sensor accept take them out and put them in. Do I replace both o2 sensors? I have read that mufflers can cause this problem as well.
First I'd like to introduce myself My name is Ed and I own a street glide special; hence the special_eddie. It is my first Harley.
I am looking for some help....I replaced my stock pipes with Vance & Hines power duals and now I am getting popping through the intake and a pinging noise. What did I do wrong? My bike is throwing codes for lean cylinders and rich cylinders as well (131,132,151 and 152).
Other pertinent info, my intake is Vance & Hines and I have FP3 map too.
I have contacted Vance and Hines and they are telling that it is a bad o2 sensor. I didn't do anything with the o2 sensor accept take them out and put them in. Do I replace both o2 sensors? I have read that mufflers can cause this problem as well.
#3
Try disconnecting the o2 sensors, then disconnect the battery over night. Then try reconnecting everything and go ride see what happens. If it throws codes again, then maybe I would try replacing the o2 sensors.
Oh.......welcome to the great forum of all time!
Oh.......welcome to the great forum of all time!
#4
sounds to me its not programed right. When you say power duels do you mean headers, if so hope you changed the mufflers too.
, also the air cleaner. Your local HD shop should help you out.
, also the air cleaner. Your local HD shop should help you out.
#5
Welcome to the HD Forums from Idaho special eddie ! You might get a much better response by going to the correct forum tho. Maybe the tuning forum also. But onr thing to check right Quick is did you get the wiring reversed on the O2's front & rear ?
Last edited by sloufoot; 09-30-2014 at 12:50 AM.