2018 Sport Glides
#331
I come from holland
Last edited by Jan Rekers; 03-08-2019 at 06:49 AM.
#332
I think I was one of the first to have my bags painted, check out page 8 of this thread for all the details and lots of pics. It's just automotive base/clear, I pulled all the hardware and stripped the bags into bare shells, scuffed them and used adhesion promotor for plastic and painted them just like any other automotive part. Came out great and are holding up perfect too. Bike sits in an unheated garage all winter too, got -35 here for about a week this year and no problems. I traded a Milwaukee buffer for the job but still have some credit, I figure cost about $150-200. You'll likely want to strip the bags yourself, that's the time consuming part a lot of painters aren't going to want to do.
The following users liked this post:
14IronCross (03-08-2019)
#333
I could ask the guy if he's interested in doing more, I'm sure he would. I'd be willing to strip and reassemble the bags for a small fee and set it all up. My guess would be total around $250-300 plus shipping both ways. If interested let me know.
#335
Seen the same set-up done by Klockwerks
Hmm maybe next year , 114/twin disc/fxrs fairing/detatch
Last edited by yobtaf103; 03-09-2019 at 03:10 PM.
#336
I took a few pictures today to capture some of the modifications I have made so far...
- Givi Top Case with tail lights
- Heated Grips
- Gustafsson 12" Windshield with X-Screen Touring clamp-on spoiler
- Freeway Blaster horns
- Memphis Shades hand guards
- RAM mount cup holder
- Touring-style Air Cleaner
- Rox 2" riser
- HD Black Mustache Engine Guards
Remaining modifications planned...
- second RAM mount cup holder (awaiting installation)
- Joker Machine mini floorboards (just ordered)
- install Heritage rear shock (currently en route)
- Custom Designs ProBeams front turn signals
- more saddle for passenger
- passenger grab rails of some sort
- side case guards of some sort
- lower wind deflectors of some sort
- Givi Top Case with tail lights
- Heated Grips
- Gustafsson 12" Windshield with X-Screen Touring clamp-on spoiler
- Freeway Blaster horns
- Memphis Shades hand guards
- RAM mount cup holder
- Touring-style Air Cleaner
- Rox 2" riser
- HD Black Mustache Engine Guards
Remaining modifications planned...
- second RAM mount cup holder (awaiting installation)
- Joker Machine mini floorboards (just ordered)
- install Heritage rear shock (currently en route)
- Custom Designs ProBeams front turn signals
- more saddle for passenger
- passenger grab rails of some sort
- side case guards of some sort
- lower wind deflectors of some sort
Last edited by HuntWhenever; 03-10-2019 at 08:00 PM.
#337
#338
That rack is the HD tour pack rack for the Sport Glide (I think the Sport Glide has its own specific rack and it hugs the rear fender pretty close). I don't have the part number as I had it installed before I picked up the bike new. Also, it required the quick-connect spools (whatever they are called). I bolted my existing Givi adapter plate to the top of the tour pack rack. https://www.revzilla.com/motorcycle/...-adapter-plate
#339
Most buffeting is coming from around the tank. I have a few designs in my head for some lexan deflectors to mount on my engine guards.
That rack is the HD tour pack rack for the Sport Glide (I think the Sport Glide has its own specific rack and it hugs the rear fender pretty close). I don't have the part number as I had it installed before I picked up the bike new. Also, it required the quick-connect spools (whatever they are called). I bolted my existing Givi adapter plate to the top of the tour pack rack. https://www.revzilla.com/motorcycle/...-adapter-plate
That rack is the HD tour pack rack for the Sport Glide (I think the Sport Glide has its own specific rack and it hugs the rear fender pretty close). I don't have the part number as I had it installed before I picked up the bike new. Also, it required the quick-connect spools (whatever they are called). I bolted my existing Givi adapter plate to the top of the tour pack rack. https://www.revzilla.com/motorcycle/...-adapter-plate
#340