Anybody use a J&S Jack with their Softail
#1
Anybody use a J&S Jack with their Softail
I am looking at purchasing a J&S jack for my 2018 lowrider my question is does anybody have any experience with a J&S jack with their new 2018/2019 Softail? And what are your impressions of the J&S jack with the new Softail? Also can anybody tell me what is the distance between the two lifting legs of the J&S jack?
Last edited by P51Driver; 06-15-2019 at 03:58 PM.
#2
The following users liked this post:
P51Driver (06-15-2019)
#3
#4
I use mine after almost every ride.
Fully compressed it is just under 4" off the floor at the end of the rails and just under 5" next to the bottle.
I use a 1" high block under the kickstand so that I can slide the jack all the way under the left frame rail to position it. Coming in from the right of course.
Fully compressed it is just under 4" off the floor at the end of the rails and just under 5" next to the bottle.
I use a 1" high block under the kickstand so that I can slide the jack all the way under the left frame rail to position it. Coming in from the right of course.
Last edited by iHodor; 06-15-2019 at 07:38 PM.
The following users liked this post:
P51Driver (06-15-2019)
#5
I use mine after almost every ride.
Fully compressed it is just under 4" at the end of the rails and just under 5" next to the bottle.
I use a 1" high block under the kickstand so that I can slide the jack all the way under the left frame rail to position it. Coming in from the right of course.
Fully compressed it is just under 4" at the end of the rails and just under 5" next to the bottle.
I use a 1" high block under the kickstand so that I can slide the jack all the way under the left frame rail to position it. Coming in from the right of course.
#7
The following users liked this post:
P51Driver (06-18-2019)
Trending Topics
#10