2012 budget build fairing lids and amp?
#22
Originally Posted by SBates08
That fella is an absolute douchebag for pulling that ****.
Karma is an absolute bad **** so if I was that dude I would be over insured in every category imaginable.
U just cannot make this shix up!!!!!
Matt, glad u called him out bro!!!!
T.
#24
I sold them to him for $200, and thats a really good deal. New they are around $300, but you will have to source your own tweeter and crossover, preferably a DD B30 or A28. I am not sure if you can get just the tweeters from BaggerAudioLab, but wont hurt to ask.
#27
Alright I got all my equipment in and been doing some research but I'm still not sure. I have American bass for the front fairing pioneer 6900 for the lids ss1000 amp and running factory tour pack speaker. My question is where do I get my power for the speaker lids do I pull from the rear harness or what? Sorry I don't understand all this audio stuff and no one local does it so I'm on my own.
#28
The next step will require u to rip the OEM TP speakers out of ur sled and run parallel with the TP and Lids. Not the ideal strategy but will work.
So the goal here is to find some 6.5s that have the same or similar sensitivity as the Pioneers (which are 92) and the 6.5 also needs to be 4 ohm.
From there u can just Y off the TP speaker wires under the seat and feed the lids.
So some inexpensive 6.5 drop in speaks for the TP pods with the above criteria ran in parallel with the lids is the base line fix.
Just my 2 pennies.
T.
So the goal here is to find some 6.5s that have the same or similar sensitivity as the Pioneers (which are 92) and the 6.5 also needs to be 4 ohm.
From there u can just Y off the TP speaker wires under the seat and feed the lids.
So some inexpensive 6.5 drop in speaks for the TP pods with the above criteria ran in parallel with the lids is the base line fix.
Just my 2 pennies.
T.
#29
The next step will require u to rip the OEM TP speakers out of ur sled and run parallel with the TP and Lids. Not the ideal strategy but will work.
So the goal here is to find some 6.5s that have the same or similar sensitivity as the Pioneers (which are 92) and the 6.5 also needs to be 4 ohm.
From there u can just Y off the TP speaker wires under the seat and feed the lids.
So some inexpensive 6.5 drop in speaks for the TP pods with the above criteria ran in parallel with the lids is the base line fix.
Just my 2 pennies.
T.
So the goal here is to find some 6.5s that have the same or similar sensitivity as the Pioneers (which are 92) and the 6.5 also needs to be 4 ohm.
From there u can just Y off the TP speaker wires under the seat and feed the lids.
So some inexpensive 6.5 drop in speaks for the TP pods with the above criteria ran in parallel with the lids is the base line fix.
Just my 2 pennies.
T.
#30