Own channel or in parallel
#1
04-23-2018, 09:30 PM
Own channel or in parallel
Just wondering if this way is more efficient or not
Currently running my Aw 6.5/At 28s on 1/2channels and Beyma in the lowers on 3/4 on Arc 600. Since the AWs can handle more power and the Beymas are real efficient would running them all in parallel over the 4 channels be a better use of the 600 watts the amp produces? Or am I not understanding how power is distributed via parallel?
Currently running my Aw 6.5/At 28s on 1/2channels and Beyma in the lowers on 3/4 on Arc 600. Since the AWs can handle more power and the Beymas are real efficient would running them all in parallel over the 4 channels be a better use of the 600 watts the amp produces? Or am I not understanding how power is distributed via parallel?
#4
04-24-2018, 07:03 AM
Outstanding HDF Member
#5
04-24-2018, 08:42 AM
I was thinking of that too and then also thinking of selling the arc and getting the new BT4250.
OR just convince myself that the system is fine how it is and let it go!
But, WE wouldnt be on this forum if it were that easy!
#6
04-24-2018, 10:41 AM
Outstanding HDF Member
#7
04-24-2018, 11:49 AM
I have done in the past before I got the set of Beymas and they do benefit from the extra power. But not sure if I want to use an entire 4 channel amp on 2 speakers! kinda a waste at that point. Just looking at alternatives.
Thread
Thread Starter
Forum
Replies
Last Post
shortride
Touring Models
0
08-22-2010 04:58 PM