2013 SG audio systems upgrade
#1
2013 SG audio systems upgrade (PA)
Hi everyone,
I am about to start upgrading my 2013 SG audio system with the below items, and I am looking for the best way to wire everything together:
- Aquatic AV head unit
- 2 soundigital 800.4 4ohm amps in fairing
- 1 Rockford Fosgate DSR1 DSP
- 2 DD VO B3 tweeters 4ohm in fairing
- 2 PRV 6MR500 8ohm in fairing
- 2 PRV 6MR300 SEAL 8ohm in lids
- 2 PRV 8MB600FT 8ohm 1 in each bag
I am open for any suggestions or recommendations on speakers as long as they are in same price range as I still didn't get them yet.
Thanks everyone.
I am about to start upgrading my 2013 SG audio system with the below items, and I am looking for the best way to wire everything together:
- Aquatic AV head unit
- 2 soundigital 800.4 4ohm amps in fairing
- 1 Rockford Fosgate DSR1 DSP
- 2 DD VO B3 tweeters 4ohm in fairing
- 2 PRV 6MR500 8ohm in fairing
- 2 PRV 6MR300 SEAL 8ohm in lids
- 2 PRV 8MB600FT 8ohm 1 in each bag
I am open for any suggestions or recommendations on speakers as long as they are in same price range as I still didn't get them yet.
Thanks everyone.
Last edited by Ali85955; 01-31-2019 at 06:42 AM. Reason: Add details
#4
#7
Trending Topics
#8
#10
Yes I tired to drop them in my system once and the result was bloody ears and vomit...BUT I will be trying them again with DSP and enclosures. I have read that these two things will make a substantial improvement. Consider using the PRV Audio D250Ph-S in the lids in lieu of the PRV Audio 6MR300SEALv2. Also consider a SD250.2 to run the BO3s on their own channels.
Then wire one horn and one 6.5 to each channel of the SD250.2 and 800.4 then bridge the other 800.4 to the PRV Audio 8MB600FTs.
Then wire one horn and one 6.5 to each channel of the SD250.2 and 800.4 then bridge the other 800.4 to the PRV Audio 8MB600FTs.
Last edited by marshallb; 01-31-2019 at 03:56 PM. Reason: more thought