200 rwhp bike- who actually runs?
#1
200 rwhp bike- who actually runs?
I'm new to this section so take no offense. I've been racing cars for years and I'm getting a hell of a lot more interested in digging into the motor in my 07 night train..I've seen about all the cosmetic threads I can stand. That said, I see a lot of gas about dyno numbers and drag dynos but I'm sure people have run their bikes at a real track too. What kind of times and mph are you guys cutting in the 1/4 mile? I am not interested in a dyno drag number.
#2
#4
Alot of the guys we build local for. We find the old farm road and race for money... Olds school style measure a 1/4mile and go......
We built are Threshold 107 blower motor with procharger should make aoruns 188/198 hp for a customer here on his 08 rocker. Goes by SSgod.
We built are Threshold 107 blower motor with procharger should make aoruns 188/198 hp for a customer here on his 08 rocker. Goes by SSgod.
#7
Here is a time slip from my 03 FXDWG. It has a 107" with a 35hp shot of nitrous on it. I weighed 270lbs at the time. The bike made 140hp and 145tq on spray. I was only spraying 2nd-5th gears. With a little practice, I could get the 60ft down to 1.6 and possibly lower my ET to about 11.0 on the other end. I lost 40lbs since last fall, my goal this year is 10.9 or so.
Last edited by redrubicon2004; 02-23-2012 at 08:50 PM.
The following users liked this post:
Campy Roadie (12-06-2017)
Trending Topics
#8
#9
#10
I hope to put down similar times on my Street glide this year. I still need to get it dyno tuned, but I am hoping for about 170hp on spray with it.
I am using a Zippers Nads system on a 124" with ported 110 heads and T-Man 662-2 cams. Should be an interesting dyno.
Here is the air cleaner backing plate with built in nitrous nozzle
I am using a Zippers Nads system on a 124" with ported 110 heads and T-Man 662-2 cams. Should be an interesting dyno.
Here is the air cleaner backing plate with built in nitrous nozzle