Arlen Ness Big Sucker maintenance
#2
Join Date: May 2015
Location: Then Wisconsin, now North Carolina
Posts: 3,172
Received 887 Likes
on
621 Posts
TERRIBLE PROCEDURE - NO ONE SHOULD FOLLOW THIS - here is why:
1) NEVER EVER use a brush on a K&N or any similar filter - you ruined it.
2) NEVER use compressed air on a K&N you ruined it. You blow holes in the media - you don't have to see them to have them there.
3) When washing it, spray the soap on first - let soak in and dissolve oil and dirt and then rinse from inside out with warm water - not outside in - never outside in.
4) When done let it air dry and apply oil per manufacturer directions AND HAVE NO UNDERSTANDING OF THESE KINDS OF FILTERS.
It is 100% evident you failed to read any instructions from K&N.
1) NEVER EVER use a brush on a K&N or any similar filter - you ruined it.
2) NEVER use compressed air on a K&N you ruined it. You blow holes in the media - you don't have to see them to have them there.
3) When washing it, spray the soap on first - let soak in and dissolve oil and dirt and then rinse from inside out with warm water - not outside in - never outside in.
4) When done let it air dry and apply oil per manufacturer directions AND HAVE NO UNDERSTANDING OF THESE KINDS OF FILTERS.
It is 100% evident you failed to read any instructions from K&N.
Last edited by Ed Ramberger; 02-08-2018 at 02:41 PM.
The following users liked this post:
grbrown (02-12-2018)
#4
Thread
Thread Starter
Forum
Replies
Last Post
streetfightingman
Dyna Glide Models
7
08-13-2008 01:37 PM