A couple of bikes the last 2 weeks

Reply Subscribe

Thread Tools

Search this Thread

#11

03-23-2023, 12:56 PM

CaffeineBuzz

Seasoned HDF Member

Join Date: Jun 2019

Location: SE Michigan

Posts: 9,651

Likes: 4,157

Received 9,476 Likes on 4,154 Posts

Quote:

Originally Posted by TnFatboy

just make sure you have plenty of light, because the CanCoat goes on clear and if it’s not buffed out properly will leave ‘smears’ for lack of a better term…

great advice, CanCoat is not like other sealants...it dries hard and is about 1/4 the thickness of what a typical coating would be

I am wondering if it would make a great LSP, in combination with PA's High Gloss as a topper...i wonder which is the more durable LSP, Glass Coat Vs CanCoat?

Reply Like

#12

03-23-2023, 03:12 PM

eaglefan1

Stellar HDF Member

Thread Starter

Join Date: Aug 2015

Location: pensacola fl

Posts: 3,108

Likes: 415

Received 1,155 Likes on 770 Posts

Quote:

Originally Posted by CaffeineBuzz

Some products are designed so well at shedding water, dirt, etc., that they can also shed toppers. Some have to be applied at a certain time after the coating application. The Demon I take care of has 2 coats of 22PLE Insanity on it. If messed around with some toppers and it turns into a streak fest. Echo2 mixed as a weak QD is the only one that has worked that I have tried on it. Gyeon Pure EVO on my wife's CTS does good with a 50/50 of Cure and water, Echo2, and Uber. However, a dedicated detail spray does not. I dont know the chemistry reason why, but this has been my experience.

Reply Like

The following users liked this post:

CaffeineBuzz (03-23-2023)