S100 Total Cycle Cleaner - WTF!
#61
So many complainers. Geez. I sold the P21S and S100 product lines from my online store for more than 10 years without any complaints... mostly to guys driving $100k+ exotic cars. If you screw up your wheels with S100, it's because you didn't follow the instructions!
Rinse first.
Agitate.
Rinse again.
If it damaged your wheels, it's because you let the cleaner dry and probably didn't agitate with a brush or a sponge. It's not a spray on, hose off cleaner.
Rinse first.
Agitate.
Rinse again.
If it damaged your wheels, it's because you let the cleaner dry and probably didn't agitate with a brush or a sponge. It's not a spray on, hose off cleaner.
#62
Looks like spray on hose off to me.
I put that **** on my Softail back in the 90's & the white etching is still there.
S100 instructions
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
I put that **** on my Softail back in the 90's & the white etching is still there.
S100 instructions
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
The following 2 users liked this post by ROCKOUT Rocker Products:
smitty901 (04-06-2020),
Uncle Larry (04-06-2020)
#63
#64
#65
Anything that leaves white corrosion will not be used by me.This will strip everything off including wax and make your polished aluminum dull or even white and spotty.Then your in for a huge headache getting it all re-polished.Im dealing with this now because the guy i bought my bike from used an acid based cleaner on the rear bare aluminum wheel.It was so bad i had to sand the wheel with 400 grit wet sandpaper and after 2 polishes its starting to come back to a good shine..Read the products before using them NO ACID ON BARE METAL!!Just mix up some good car wash soap in a spray bottle,Wet the bike,soak it down good and scrub.Not when its hot or in the sun either.Be sure its cool and in the shade or a garage when you soap it up.If you need to degrease something just mix up a strong mix of dawn dish washing liquid in a spray bottle and use a brush..Dawn will also remove wax and polish but won't corrode things like acid..
Been detailing autos for 15 years.
Been detailing autos for 15 years.
#66
The following users liked this post:
ROCKOUT Rocker Products (07-15-2020)
#67
I've been using S100 for several years now. Very happy with it, just followed the directions, cold bike, spray it on, hose it off with a lot of water and as high a pressure as I can get out of my hose, then wipe it dry with a micro fiber cloth.
Don't let it sit, don't use it on a hot bike, don't use a leaf blower to blow dry it. Just follow the directions.
https://www.youtube.com/watch?v=h2Z6...ature=youtu.be
Don't let it sit, don't use it on a hot bike, don't use a leaf blower to blow dry it. Just follow the directions.
https://www.youtube.com/watch?v=h2Z6...ature=youtu.be
#68
Thread
Thread Starter
Forum
Replies
Last Post
RevMatt
Detailing
13
12-17-2011 09:18 AM