What Risers for 1 1/8th renthal bars
#11
Spend a little more, and get a set form a reputable fabricator.
Lucky Dave's has a nice set, but they;re slightly different than what you have here. DynaKid can speak on their behalf, he has a set.
I have West Coast T Bars, and love them... Top quality. They also have the same style you have listed here.
The following users liked this post:
emperor wurm (12-14-2016)
#12
Yup. I run these ones -
http://luckydaves.com/product/lucky-13-bar/
13" height with a bit of pullback in the bars and risers. Did Vegas and back with them no problem. Super comfortable IMO
These ones are nice if you don't want the pullback. Buddy of mine runs them on his FXR and loves them.
http://luckydaves.com/product/the-san-diego-bar/
http://luckydaves.com/product/lucky-13-bar/
13" height with a bit of pullback in the bars and risers. Did Vegas and back with them no problem. Super comfortable IMO
These ones are nice if you don't want the pullback. Buddy of mine runs them on his FXR and loves them.
http://luckydaves.com/product/the-san-diego-bar/
The following users liked this post:
emperor wurm (12-16-2016)
#13
Yup. I run these ones -
http://luckydaves.com/product/lucky-13-bar/
13" height with a bit of pullback in the bars and risers. Did Vegas and back with them no problem. Super comfortable IMO
These ones are nice if you don't want the pullback. Buddy of mine runs them on his FXR and loves them.
http://luckydaves.com/product/the-san-diego-bar/
http://luckydaves.com/product/lucky-13-bar/
13" height with a bit of pullback in the bars and risers. Did Vegas and back with them no problem. Super comfortable IMO
These ones are nice if you don't want the pullback. Buddy of mine runs them on his FXR and loves them.
http://luckydaves.com/product/the-san-diego-bar/
Seems like if ur going to run it, measure your rise on ur bars and add it to your risers to get your roughly 14" cable length. I had 14" tbars and switched to Big Al's Cycles's 8" kickback risers and the Kdub bars (4.5" rise) .. doesnt quite get me 14" but everything worked out great.
Lucky daves and big al's makes the 1" bars. Big al's has 3 different bends with different heights to get where you want to be. I think biltwell has their murdock risers for 1" bars as well.
So its a toss up, if u want to run that bar you got, hit up Justin at Hardcase and tell him what u have and what u want and hell set u up with a kit thatl work. or just go with the 1" bar route. either way, post up what ya end up going with!
The following users liked this post:
emperor wurm (12-16-2016)
#15
Yup. I run these ones -
http://luckydaves.com/product/lucky-13-bar/
13" height with a bit of pullback in the bars and risers. Did Vegas and back with them no problem. Super comfortable IMO
These ones are nice if you don't want the pullback. Buddy of mine runs them on his FXR and loves them.
http://luckydaves.com/product/the-san-diego-bar/
http://luckydaves.com/product/lucky-13-bar/
13" height with a bit of pullback in the bars and risers. Did Vegas and back with them no problem. Super comfortable IMO
These ones are nice if you don't want the pullback. Buddy of mine runs them on his FXR and loves them.
http://luckydaves.com/product/the-san-diego-bar/
#16
#17
Comes painted black. Fit and finish is about 8/10 IMO. Don't have any pictures of it off the bike but I could get some close-ups of everything when I get home later.
#18
#19
I love the look of the risers and 1 1/8 bars too, but that price tag is keeping me away. I'm sure the price is justified because these things look much better than most options out there.
Unfortunately, until I become sponsored by one of these companies for my lame *** wheelies and drifting, it's not gonna happen for me.
Unfortunately, until I become sponsored by one of these companies for my lame *** wheelies and drifting, it's not gonna happen for me.
#20
I've got some of the pieces needed in a box somewhere. Not a complete set of mids but should get you close to everything you need. Shoot me a message later tonight and I'll send you some pics. They're yours if you want them, I had them for the old WG, never got around to using them.
The following users liked this post:
emperor wurm (12-16-2016)